HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier. This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform. The scripts at https://github.com/thesofproject/acpi-scripts can be used to add the ACPI initrd overlays. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> --- sound/soc/codecs/wm8804-i2c.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8804-i2c.c b/sound/soc/codecs/wm8804-i2c.c index f27464c2c5ba..79541960f45d 100644 --- a/sound/soc/codecs/wm8804-i2c.c +++ b/sound/soc/codecs/wm8804-i2c.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/i2c.h> +#include <linux/acpi.h> #include "wm8804.h" @@ -40,17 +41,29 @@ static const struct i2c_device_id wm8804_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, wm8804_i2c_id); +#if defined(CONFIG_OF) static const struct of_device_id wm8804_of_match[] = { { .compatible = "wlf,wm8804", }, { } }; MODULE_DEVICE_TABLE(of, wm8804_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id wm8804_acpi_match[] = { + { "1AEC8804", 0 }, /* Wolfson PCI ID + part ID */ + { "10138804", 0 }, /* Cirrus Logic PCI ID + part ID */ + { }, +}; +MODULE_DEVICE_TABLE(acpi, wm8804_acpi_match); +#endif static struct i2c_driver wm8804_i2c_driver = { .driver = { .name = "wm8804", .pm = &wm8804_pm, - .of_match_table = wm8804_of_match, + .of_match_table = of_match_ptr(wm8804_of_match), + .acpi_match_table = ACPI_PTR(wm8804_acpi_match), }, .probe = wm8804_i2c_probe, .remove = wm8804_i2c_remove, -- 2.17.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
