Hi, when trying to clock my terratec ews88d from an apogee rosetta AD it just won't. The s/pdif input works but the card won't lock to the s/pdif clock but rather stay at whatever setting it was at before i change to s/pdif in envy24control or mudita24. Since I have another converter slaved via ADAT out I can tell what sample rate is being output via ADAT sync. Works perfectly for setting the sample rate in envy24control but not when i choose external clock and change the rate on the Apogee AD. Also, audio recorded through the s/pdif input is obviously at the wrong rate when changing the rate on the Apogee AD. I found this old discussion which seems to describe the same problem: http://alsa-devel.alsa-project.narkive.com/30mvygRD/m-audio-delta-1010lt-s-pdif-clock-source-not-working Also, there is a problem with the alsa-info.sh script, it didn't give me url to share. Just the message Your ALSA information is located at Please inform the person helping you. If the alsa-info.sh output is required i'll post it in an e-mail. kind regards, -- Tobias Eklund Fatburs Brunnsgata 31 118 28 Stockholm 0046 707570196 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
