On 7/20/18 2:27 AM, Hans de Goede wrote:
The volumes are taken from this commit:
https://github.com/plbossart/UCM/commit/753e2430cd0e6cafbf10c6b29b689dbd32ac5250
That commit also adds line-in support, so it has not been
taken in its entirety.
Was there anything wrong with the line-in? It's been a while and I fried
my board but I think it worked ok. The settings came from Bard Liao.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
index 5dcb11e6..d6e8e48d 100644
--- a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
+++ b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
@@ -117,16 +117,13 @@ SectionDefaults [
cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off"
# default state
- cset "name='ADC Capture Volume' 126"
cset "name='HPO MIX DAC1 Switch' on"
cset "name='HPO MIX HPVOL Switch' off"
- cset "name='HP Playback Volume' 0"
cset "name='HPO L Playback Switch' off"
cset "name='HPO R Playback Switch' off"
cset "name='HPOVOL L Switch' on"
cset "name='HPOVOL R Switch' on"
cset "name='IF1 ASRC Switch' on"
- cset "name='IN Capture Volume' 27"
cset "name='IN2 Boost' 1"
cset "name='IN1 Boost' 1"
cset "name='LOUT L Playback Switch' on"
@@ -145,6 +142,13 @@ SectionDefaults [
cset "name='Headphone Switch' off"
cset "name='Speaker Switch' off"
+ # volumes for 0dB
+ cset "name='OUT Playback Volume' 31"
+ cset "name='HP Playback Volume' 31"
+ cset "name='IN Capture Volume' 23"
+ cset "name='ADC Capture Volume' 47"
+ cset "name='DAC1 Playback Volume' 175"
+
# input
cset "name='Stereo1 ADC L1 Mux' ADC"
cset "name='Stereo1 ADC R1 Mux' ADC"
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
