Re: [PATCH v2 3/3] ASoC: Intel: bytcr_rt5651: Add support for externar amplifier enable GPIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 04-07-18 02:14, Pierre-Louis Bossart wrote:
On 7/1/18 1:36 PM, Hans de Goede wrote:
The rt5651 does not have a built-in speaker amplifier, so it is often
used together with an external amplifier. On Cherry Trail boards this
external amplifier's enable pin is driven through a GPIO, which is
given as the first GPIO in the ACPI resources of the codec fwnode.

This commit adds support to the bytcr_rt5651 for this GPIO, fixing
the speaker not working on CHT devices with a rt5651 codec.

ALl this GPIO/ACPI stuff is a bit beyond my understanding. My only comment is "how would this work on Baytrail"? There are clearly a set of devices which use the SSP0 routing - so Baytrail-CR packages, it's not clear to me how the amplifier is controlled in those cases?

I have a couple of BYT devices with a rt5651 codec and there the
amplifier just works. Either it is a different model without an
enable pin, or the enable pin is hard wired to Vcc.

Regards,

Hans




Cc: Carlo Caione <carlo@xxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v2:
-Handle the ext amp GPIO entirely in the machine driver, the ext-amp is
  not part of the codec, so it should not be controlled by the codec driver
---
  sound/soc/intel/boards/bytcr_rt5651.c | 65 +++++++++++++++++++++++++--
  1 file changed, 62 insertions(+), 3 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index d920725ce603..5301205496be 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -26,6 +26,8 @@
  #include <linux/clk.h>
  #include <linux/device.h>
  #include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
  #include <linux/slab.h>
  #include <asm/cpu_device_id.h>
  #include <asm/intel-family.h>
@@ -86,6 +88,7 @@ enum {
  struct byt_rt5651_private {
      struct clk *mclk;
+    struct gpio_desc *ext_amp_gpio;
      struct snd_soc_jack jack;
  };
@@ -208,6 +211,20 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
      return 0;
  }
+static int rt5651_ext_amp_power_event(struct snd_soc_dapm_widget *w,
+    struct snd_kcontrol *kcontrol, int event)
+{
+    struct snd_soc_card *card = w->dapm->card;
+    struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card);
+
+    if (SND_SOC_DAPM_EVENT_ON(event))
+        gpiod_set_value_cansleep(priv->ext_amp_gpio, 1);
+    else
+        gpiod_set_value_cansleep(priv->ext_amp_gpio, 0);
+
+    return 0;
+}
+
  static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = {
      SND_SOC_DAPM_HP("Headphone", NULL),
      SND_SOC_DAPM_MIC("Headset Mic", NULL),
@@ -217,7 +234,9 @@ static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = {
      SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
                  platform_clock_control, SND_SOC_DAPM_PRE_PMU |
                  SND_SOC_DAPM_POST_PMD),
-
+    SND_SOC_DAPM_SUPPLY("Ext Amp Power", SND_SOC_NOPM, 0, 0,
+                rt5651_ext_amp_power_event,
+                SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
  };
  static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = {
@@ -225,6 +244,7 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = {
      {"Headset Mic", NULL, "Platform Clock"},
      {"Internal Mic", NULL, "Platform Clock"},
      {"Speaker", NULL, "Platform Clock"},
+    {"Speaker", NULL, "Ext Amp Power"},
      {"Line In", NULL, "Platform Clock"},
      {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */
@@ -678,6 +698,18 @@ static const struct x86_cpu_id baytrail_cpu_ids[] = {
      {}
  };
+static const struct x86_cpu_id cherrytrail_cpu_ids[] = {
+    { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT },     /* Braswell */
+    {}
+};
+
+static const struct acpi_gpio_params ext_amp_enable_gpios = { 0, 0, false };
+
+static const struct acpi_gpio_mapping byt_rt5651_gpios[] = {
+    { "ext-amp-enable-gpios", &ext_amp_enable_gpios, 1 },
+    { },
+};
+
  struct acpi_chan_package {   /* ACPICA seems to require 64 bit integers */
      u64 aif_value;       /* 1: AIF1, 2: AIF2 */
      u64 mclock_value;    /* usually 25MHz (0x17d7940), ignored */
@@ -793,9 +825,36 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
      /* Must be called before register_card, also see declaration comment. */
      ret_val = byt_rt5651_add_codec_device_props(codec_dev);
-    put_device(codec_dev);
-    if (ret_val)
+    if (ret_val) {
+        put_device(codec_dev);
          return ret_val;
+    }
+
+    /* Cherry Trail devices use an external amplifier enable gpio */
+    if (x86_match_cpu(cherrytrail_cpu_ids)) {
+        devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios);
+        priv->ext_amp_gpio = devm_fwnode_get_index_gpiod_from_child(
+                        &pdev->dev, "ext-amp-enable", 0,
+                        codec_dev->fwnode,
+                        GPIOD_OUT_LOW, "speaker-amp");
+        if (IS_ERR(priv->ext_amp_gpio)) {
+            ret_val = PTR_ERR(priv->ext_amp_gpio);
+            switch (ret_val) {
+            case -ENOENT:
+                priv->ext_amp_gpio = NULL;
+                break;
+            default:
+                dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n",
+                    ret_val);
+                /* fall through */
+            case -EPROBE_DEFER:
+                put_device(codec_dev);
+                return ret_val;
+            }
+        }
+    }
+
+    put_device(codec_dev);
      log_quirks(&pdev->dev);


_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux