On 05/22/2018 11:58 AM, Guenter Roeck wrote:
From: Guenter Roeck <groeck@xxxxxxxxxxxx>
Commit dc31e741db49 ("ASoC: topology: ABI - Add the types for BE
DAI") introduced sound topology files version 5. Initially, this
change made the topology code incompatible with v4 topology files.
Backwards compatibility with v4 configuration files was
subsequently added with commit 288b8da7e992 ("ASoC: topology:
Support topology file of ABI v4").
Unfortunately, backwards compatibility was never fully implemented.
First, the manifest size in (Skylake) v4 configuration files is set
to 0, which causes manifest_new_ver() to bail out with error messages
similar to the following.
snd_soc_skl 0000:00:1f.3: ASoC: invalid manifest size
snd_soc_skl 0000:00:1f.3: tplg component load failed-22
snd_soc_skl 0000:00:1f.3: Failed to init topology!
snd_soc_skl 0000:00:1f.3: ASoC: failed to probe component -22
skl_n88l25_m98357a skl_n88l25_m98357a: ASoC: failed to instantiate card -22
skl_n88l25_m98357a: probe of skl_n88l25_m98357a failed with error -22
After this problem is fixed, the following error message is seen instead.
snd_soc_skl 0000:00:1f.3: ASoC: old version of manifest
snd_soc_skl 0000:00:1f.3: Invalid descriptor token 1093938482
snd_soc_skl 0000:00:1f.3: ASoC: failed to load widget media0_in cpr 0
snd_soc_skl 0000:00:1f.3: tPlg component load failed-22
This message is seen because backwards compatibility for loading widgets
was never implemented.
Both problems have been widely reported. Various attempts were made to
fix the problem, usually by providing v5 configuration files. However,
all those attempts result in incomplete ASoC configuration.
Let's implement backward compatibility properly to solve the problem
for good.
Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxxx>
I don't have any devices on which I can test but the code looks ok
compared to chromeos-3.18 (minor comments below).
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
---
Tested on Caroline (Samsung Chromebook Pro) running v4.17-rc6 plus
this patch, with original (v4) configuration file. Also tested on
several other Chromebooks with this patch on top of chromeos-4.14.
Additional real world test coverage would be useful before moving forward.
sound/soc/intel/skylake/skl-topology.c | 235 +++++++++++++++++++++++++
sound/soc/soc-topology.c | 7 +-
2 files changed, 240 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
index 3b1dca419883..cc81e200e6b7 100644
--- a/sound/soc/intel/skylake/skl-topology.c
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/firmware.h>
+#include <linux/uuid.h>
#include <sound/soc.h>
#include <sound/soc-topology.h>
#include <uapi/sound/snd_sst_tokens.h>
@@ -30,6 +31,79 @@
#include "../common/sst-dsp.h"
#include "../common/sst-dsp-priv.h"
+/* v4 configuration data */
+struct skl_dfw_v4_module_pin {
+ u16 module_id;
+ u16 instance_id;
+} __packed;
+
+struct skl_dfw_v4_module_fmt {
+ u32 channels;
+ u32 freq;
+ u32 bit_depth;
+ u32 valid_bit_depth;
+ u32 ch_cfg;
+ u32 interleaving_style;
+ u32 sample_type;
+ u32 ch_map;
+} __packed;
+
+struct skl_dfw_v4_module_caps {
+ u32 set_params:2;
+ u32 rsvd:30;
+ u32 param_id;
+ u32 caps_size;
+ u32 caps[HDA_SST_CFG_MAX];
+};
+
+struct skl_dfw_v4_pipe {
+ u8 pipe_id;
+ u8 pipe_priority;
+ u16 conn_type:4;
+ u16 rsvd:4;
+ u16 memory_pages:8;
+} __packed;
+
+struct skl_dfw_v4_module {
+ char uuid[SKL_UUID_STR_SZ];
+
+ u16 module_id;
+ u16 instance_id;
+ u32 max_mcps;
+ u32 mem_pages;
+ u32 obs;
+ u32 ibs;
+ u32 vbus_id;
+
+ u32 max_in_queue:8;
+ u32 max_out_queue:8;
+ u32 time_slot:8;
+ u32 core_id:4;
+ u32 rsvd1:4;
+
+ u32 module_type:8;
+ u32 conn_type:4;
+ u32 dev_type:4;
+ u32 hw_conn_type:4;
+ u32 rsvd2:12;
+
+ u32 params_fixup:8;
+ u32 converter:8;
+ u32 input_pin_type:1;
+ u32 output_pin_type:1;
+ u32 is_dynamic_in_pin:1;
+ u32 is_dynamic_out_pin:1;
+ u32 is_loadable:1;
+ u32 rsvd3:11;
+
+ struct skl_dfw_v4_pipe pipe;
+ struct skl_dfw_v4_module_fmt in_fmt[MAX_IN_QUEUE];
+ struct skl_dfw_v4_module_fmt out_fmt[MAX_OUT_QUEUE];
+ struct skl_dfw_v4_module_pin in_pin[MAX_IN_QUEUE];
+ struct skl_dfw_v4_module_pin out_pin[MAX_OUT_QUEUE];
+ struct skl_dfw_v4_module_caps caps;
+} __packed;
+
All the structures match what I can see in sof-topology.h for chromeos-3.18.
So far so good.
#define SKL_CH_FIXUP_MASK (1 << 0)
#define SKL_RATE_FIXUP_MASK (1 << 1)
#define SKL_FMT_FIXUP_MASK (1 << 2)
@@ -2724,6 +2798,160 @@ static int skl_tplg_get_desc_blocks(struct device *dev,
return -EINVAL;
}
+/*
+ * Add pipeline from topology binary into driver pipeline list
+ *
+ * If already added we return that instance
+ * Otherwise we create a new instance and add into driver list
+ */
+static int skl_tplg_add_pipe_v4(struct device *dev,
+ struct skl_module_cfg *mconfig, struct skl *skl,
+ struct skl_dfw_v4_pipe *dfw_pipe)
+{
+ struct skl_pipeline *ppl;
+ struct skl_pipe *pipe;
+ struct skl_pipe_params *params;
+
+ list_for_each_entry(ppl, &skl->ppl_list, node) {
+ if (ppl->pipe->ppl_id == dfw_pipe->pipe_id) {
+ mconfig->pipe = ppl->pipe;
+ return 0;
+ }
+ }
+
+ ppl = devm_kzalloc(dev, sizeof(*ppl), GFP_KERNEL);
+ if (!ppl)
+ return -ENOMEM;
+
+ pipe = devm_kzalloc(dev, sizeof(*pipe), GFP_KERNEL);
+ if (!pipe)
+ return -ENOMEM;
+
+ params = devm_kzalloc(dev, sizeof(*params), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ pipe->ppl_id = dfw_pipe->pipe_id;
+ pipe->memory_pages = dfw_pipe->memory_pages;
+ pipe->pipe_priority = dfw_pipe->pipe_priority;
+ pipe->conn_type = dfw_pipe->conn_type;
+ pipe->state = SKL_PIPE_INVALID;
+ pipe->p_params = params;
+ INIT_LIST_HEAD(&pipe->w_list);
+
+ ppl->pipe = pipe;
+ list_add(&ppl->node, &skl->ppl_list);
+
+ mconfig->pipe = pipe;
+ mconfig->pipe->state = SKL_PIPE_INVALID;
That last assignment does not seem necessary? pipe->state is already set
above.
+
+ return 0;
+}
+
+static void skl_fill_module_pin_info_v4(struct skl_dfw_v4_module_pin *dfw_pin,
+ struct skl_module_pin *m_pin,
+ bool is_dynamic, int max_pin)
+{
+ int i;
+
+ for (i = 0; i < max_pin; i++) {
+ m_pin[i].id.module_id = dfw_pin[i].module_id;
+ m_pin[i].id.instance_id = dfw_pin[i].instance_id;
+ m_pin[i].in_use = false;
+ m_pin[i].is_dynamic = is_dynamic;
+ m_pin[i].pin_state = SKL_PIN_UNBIND;
+ }
+}
+
+static void skl_tplg_fill_fmt_v4(struct skl_module_pin_fmt *dst_fmt,
+ struct skl_dfw_v4_module_fmt *src_fmt,
+ int pins)
+{
+ int i;
+
+ for (i = 0; i < pins; i++) {
+ dst_fmt[i].fmt.channels = src_fmt[i].channels;
+ dst_fmt[i].fmt.s_freq = src_fmt[i].freq;
+ dst_fmt[i].fmt.bit_depth = src_fmt[i].bit_depth;
+ dst_fmt[i].fmt.valid_bit_depth = src_fmt[i].valid_bit_depth;
+ dst_fmt[i].fmt.ch_cfg = src_fmt[i].ch_cfg;
+ dst_fmt[i].fmt.ch_map = src_fmt[i].ch_map;
+ dst_fmt[i].fmt.interleaving_style =
+ src_fmt[i].interleaving_style;
+ dst_fmt[i].fmt.sample_type = src_fmt[i].sample_type;
+ }
+}
+
+static int skl_tplg_get_pvt_data_v4(struct snd_soc_tplg_dapm_widget *tplg_w,
+ struct skl *skl, struct device *dev,
+ struct skl_module_cfg *mconfig)
+{
+ struct skl_dfw_v4_module *dfw =
+ (struct skl_dfw_v4_module *)tplg_w->priv.data;
+ int ret;
+
+ dev_dbg(dev, "Parsing Skylake v4 widget topology data\n");
+
+ ret = guid_parse(dfw->uuid, (guid_t *)mconfig->guid);
+ if (ret)
+ return ret;
+ mconfig->id.module_id = -1;
+ mconfig->id.instance_id = dfw->instance_id;
+ mconfig->module->resources[0].cps = dfw->max_mcps;
+ mconfig->module->resources[0].ibs = dfw->ibs;
+ mconfig->module->resources[0].obs = dfw->obs;
+ mconfig->core_id = dfw->core_id;
+ mconfig->module->max_input_pins = dfw->max_in_queue;
+ mconfig->module->max_output_pins = dfw->max_out_queue;
+ mconfig->module->loadable = dfw->is_loadable;
+ skl_tplg_fill_fmt_v4(mconfig->module->formats[0].inputs, dfw->in_fmt,
+ MAX_IN_QUEUE);
+ skl_tplg_fill_fmt_v4(mconfig->module->formats[0].outputs, dfw->out_fmt,
+ MAX_OUT_QUEUE);
Not clear to me if there is a confusion between MAX_IN_QUEUE and
MODULE_MAX_IN_PINS. The two values happen to be identical.
+
+ mconfig->params_fixup = dfw->params_fixup;
+ mconfig->converter = dfw->converter;
+ mconfig->m_type = dfw->module_type;
+ mconfig->vbus_id = dfw->vbus_id;
+ mconfig->module->resources[0].is_pages = dfw->mem_pages;
+
+ ret = skl_tplg_add_pipe_v4(dev, mconfig, skl, &dfw->pipe);
+ if (ret)
+ return ret;
+
+ mconfig->dev_type = dfw->dev_type;
+ mconfig->hw_conn_type = dfw->hw_conn_type;
+ mconfig->time_slot = dfw->time_slot;
+ mconfig->formats_config.caps_size = dfw->caps.caps_size;
chromeos-3.18 has this:
if (dfw_config->is_loadable)
memcpy(mconfig->guid, dfw_config->uuid,
ARRAY_SIZE(dfw_config->uuid));
Is this needed here?
+
+ mconfig->m_in_pin = devm_kzalloc(dev,
+ MAX_IN_QUEUE * sizeof(*mconfig->m_in_pin),
+ GFP_KERNEL);
+ if (!mconfig->m_in_pin)
+ return -ENOMEM;
+
+ mconfig->m_out_pin = devm_kzalloc(dev,
+ MAX_OUT_QUEUE * sizeof(*mconfig->m_out_pin),
+ GFP_KERNEL);
+ if (!mconfig->m_out_pin)
+ return -ENOMEM;
+
+ skl_fill_module_pin_info_v4(dfw->in_pin, mconfig->m_in_pin,
+ dfw->is_dynamic_in_pin,
+ mconfig->module->max_input_pins);
+ skl_fill_module_pin_info_v4(dfw->out_pin, mconfig->m_out_pin,
+ dfw->is_dynamic_out_pin,
+ mconfig->module->max_output_pins);
+
+ if (mconfig->formats_config.caps_size) {
+ dev_warn(dev, "caps size %d not supported, will be ignored\n",
+ mconfig->formats_config.caps_size);
+ mconfig->formats_config.caps_size = 0;
+ }
+
+ return 0;
+}
+
/*
* Parse the private data for the token and corresponding value.
* The private data can have multiple data blocks. So, a data block
@@ -2739,6 +2967,13 @@ static int skl_tplg_get_pvt_data(struct snd_soc_tplg_dapm_widget *tplg_w,
char *data;
int ret;
+ /*
+ * v4 configuration files have a valid UUID at the start of
+ * the widget's private data.
+ */
+ if (uuid_is_valid((char *)tplg_w->priv.data))
+ return skl_tplg_get_pvt_data_v4(tplg_w, skl, dev, mconfig);
+
/* Read the NUM_DATA_BLOCKS descriptor */
array = (struct snd_soc_tplg_vendor_array *)tplg_w->priv.data;
ret = skl_tplg_get_desc_blocks(dev, array);
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 986b8b2f90fb..d66b2e5ccd67 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2293,8 +2293,11 @@ static int manifest_new_ver(struct soc_tplg *tplg,
*manifest = NULL;
if (src->size != sizeof(*src_v4)) {
- dev_err(tplg->dev, "ASoC: invalid manifest size\n");
- return -EINVAL;
+ dev_warn(tplg->dev, "ASoC: invalid manifest size %d\n",
+ src->size);
+ if (src->size)
+ return -EINVAL;
+ src->size = sizeof(*src_v4);
}
dev_warn(tplg->dev, "ASoC: old version of manifest\n");
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
