On Fri, May 04, 2018 at 09:10:32AM +0800, John Hsu wrote: > On 5/4/2018 7:10 AM, Mark Brown wrote: > > On Thu, May 03, 2018 at 10:46:42AM +0800, John Hsu wrote: > > > The MICBAIS will not supply if there is only one path from MICP to > > > input boost stage. The driver fixes the issue by changing the supply > > > target to input boost stage mixer. > > Does the input boost stage actually use the MICBIAS supply directly? > > More usually a microphone bias would supply the microphone rather than > > anything on the chip itself. > The input boost stage has a mixer of two input sources. The normal case > is that MIC goes to input PGA, then to input boot stage. The case is > the original design of the driver. But there is another path that MIC > goes input boot stage directly. The case is less happened but has chance. > Ex. The single-end MIC goes to input boot stage. Therefore, we move > the target of MICBIAS to input boost stage which can supply power for > both cases. That's not really answering the question - the issue is that the micbias is normally connected to the microphone and supplies that, it's not normally connected to anything in the CODEC itself. You're talking about the path for the signal from the microphone which isn't the same thing as the power to the microphone. The system could have external micbiases or use the input for something that isn't actually a microphone for example.
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
