On 04/26/18 14:51, Peter Ujfalusi wrote: > The n810 uses tlv320aic33 codec. > GPIO118 is used as reset GPIO for the codec, which was missing. > The MCLK of the codec is connected to the SYS_CLKOUT2 of omap2420. The > SYS_CLKOUT2 needs to be running at 12MHz. > > Add the pinctrl entries to configure the pins for GPIO118 and SYS_CLKOUT2. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> > --- > arch/arm/boot/dts/omap2420-n810.dts | 21 +++++++++++++++++++-- > 1 file changed, 19 insertions(+), 2 deletions(-) > Tested-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx> _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
