On ST/CZ based platforms, for specific platform bt uart
mux to be defined for bt i2s.
By default, these pins will be used for uart.
After acp reset , it requires to reprogram bt i2s config
mux pins to enable bt i2s instance.
added bt i2s enablement sequence during acp init.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@xxxxxxx>
Signed-off-by: Akshu Agrawal <akshu.agrawal@xxxxxxx>
---
v1->v2: fixed kbuild errors
sound/soc/amd/acp-da7219-max98357a.c | 2 ++
sound/soc/amd/acp-pcm-dma.c | 9 +++++++++
sound/soc/amd/acp.h | 1 +
3 files changed, 12 insertions(+)
diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c
index b205c78..9ff2138 100644
--- a/sound/soc/amd/acp-da7219-max98357a.c
+++ b/sound/soc/amd/acp-da7219-max98357a.c
@@ -44,6 +44,7 @@
static struct snd_soc_jack cz_jack;
struct clk *da7219_dai_clk;
+extern int bt_pad_enable;
static int cz_da7219_init(struct snd_soc_pcm_runtime *rtd)
{
@@ -251,6 +252,7 @@ static int cz_probe(struct platform_device *pdev)
cz_card.name, ret);
return ret;
}
+ bt_pad_enable = device_property_read_bool(&pdev->dev, "bt-pad-enable");
return 0;
}
diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 7c392fe..b52c660 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -46,6 +46,8 @@
#define DRV_NAME "acp_audio_dma"
+bool bt_pad_enable = false;
+EXPORT_SYMBOL(bt_pad_enable);
static const struct snd_pcm_hardware acp_pcm_hardware_playback = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
@@ -525,6 +527,13 @@ static int acp_init(void __iomem *acp_mmio, u32 asic_type)
val &= ~ACP_SOFT_RESET__SoftResetAud_MASK;
acp_reg_write(val, acp_mmio, mmACP_SOFT_RESET);
+ /* For BT instance change pins from UART to BT */
+ if (bt_pad_enable) {
+ val = acp_reg_read(acp_mmio, mmACP_BT_UART_PAD_SEL);
+ val |= ACP_BT_UART_PAD_SELECT_MASK;
+ acp_reg_write(val, acp_mmio, mmACP_BT_UART_PAD_SEL);
+ }
+
/* initiailize Onion control DAGB register */
acp_reg_write(ACP_ONION_CNTL_DEFAULT, acp_mmio,
mmACP_AXI2DAGB_ONION_CNTL);
diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h
index 95c39a3..520a08f 100644
--- a/sound/soc/amd/acp.h
+++ b/sound/soc/amd/acp.h
@@ -110,6 +110,7 @@
#define ACP_I2S_MIC_16BIT_RESOLUTION_EN 0x01
#define ACP_I2S_SP_16BIT_RESOLUTION_EN 0x02
#define ACP_I2S_BT_16BIT_RESOLUTION_EN 0x04
+#define ACP_BT_UART_PAD_SELECT_MASK 0x1
enum acp_dma_priority_level {
/* 0x0 Specifies the DMA channel is given normal priority */
--
2.7.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
