The freq parameter indicates the physical frequency of an actual
input clock or a desired frequency of an output clock for HCKT/R.
It should never be passed 0. This might cause Division-by-zero.
So this patch adds a check to fix it.
Signed-off-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
---
sound/soc/fsl/fsl_esai.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index da8fd98..d79e99e 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -226,6 +226,12 @@ static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned long clk_rate;
int ret;
+ if (freq == 0) {
+ dev_err(dai->dev, "%sput freq of HCK%c should not be 0Hz\n",
+ in ? "in" : "out", tx ? 'T' : 'R');
+ return -EINVAL;
+ }
+
/* Bypass divider settings if the requirement doesn't change */
if (freq == esai_priv->hck_rate[tx] && dir == esai_priv->hck_dir[tx])
return 0;
--
2.7.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
