On 02/24/2018 03:46 PM, Pavel Machek wrote:
> Hi!
>
> In v4.16, AV jack support disappeared.
>
> This one is suspect:
>
> commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057
> Author: Andrew F. Davis <afd@xxxxxx>
> Date: Wed Nov 29 11:13:59 2017 -0600
>
> ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
>
> The correct DT property for specifying a GPIO used for reset
> is "reset-gpios", fix this here.
>
> Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X
> support")
>
> Signed-off-by: Andrew F. Davis <afd@xxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
>
> How was it tested? It reverts polarity of reset pin, but
> sound/soc/codecs/tlv320aic3x.c treats those as aliases:
>
The polarity was wrong before, the AIC3x devices are active low reset
and there is no logic inverters between the SoC and the reset line.
GPIO_ACTIVE_LOW is therefor the correct polarity.
This does not change the driver behavior as currently it uses the old
gpio_set_value() which does not respect the polarity as set in DT.
When this driver is converted to use gpiod_ style calls having the
polarity correct will be important, and right now the old style gpio
calls will cause this driver to fail to work if a board comes along that
does have some logic inversion on the reset line as GPIO_ACTIVE is ignored.
As Pavel points out I think your trouble is elsewhere.
Andrew
> ret = of_get_named_gpio(np, "reset-gpios", 0);
> if (ret >= 0) {
> aic3x->gpio_reset = ret;
> } else {
> ret = of_get_named_gpio(np, "gpio-reset", 0);
> if (ret > 0) {
> dev_warn(&i2c->dev, "Using deprecated property \"gpio-r\eset\", please update your DT");
> aic3x->gpio_reset = ret;
>
>
> Pavel
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
