When the BYT_RT5651_MCLK_EN quirk is set, we disable the MCLK from
byt_rt5651_init(), we need to select the RCCLK as sysclk before doing this
to make sure that jack-detect works directly after boot.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
sound/soc/intel/boards/bytcr_rt5651.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index c695247341f3..ceb3858a0e41 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -425,6 +425,11 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
card->dapm.idle_bias_off = true;
+ /* Start with RC clk for jack-detect (we disable MCLK below) */
+ if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN)
+ snd_soc_component_update_bits(codec, RT5651_GLB_CLK,
+ RT5651_SCLK_SRC_MASK, RT5651_SCLK_SRC_RCCLK);
+
switch (BYT_RT5651_MAP(byt_rt5651_quirk)) {
case BYT_RT5651_IN1_MAP:
custom_map = byt_rt5651_intmic_in1_map;
--
2.14.3
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
