On Mon, 15 Jan 2018 08:50:17 +0100,
Takashi Iwai wrote:
>
> On Mon, 15 Jan 2018 06:11:56 +0100,
> Randy Dunlap wrote:
> >
> > From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> >
> > Drivers should not 'select' a subsystem. Instead they should depend
> > on it. If the subsystem is disabled, the user probably did that for
> > a purpose and one driver shouldn't be changing that.
> >
> > This also makes all sound/ drivers consistent w.r.t depending on INPUT
> > instead of selecting it.
> >
> > Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> > Cc: Jaroslav Kysela <perex@xxxxxxxx>
> > Cc: Takashi Iwai <tiwai@xxxxxxxx>
> > Cc: alsa-devel@xxxxxxxxxxxxxxxx (moderated for non-subscribers)
> > ---
> > sound/pci/hda/Kconfig | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > --- lnx-415-rc8.orig/sound/pci/hda/Kconfig
> > +++ lnx-415-rc8/sound/pci/hda/Kconfig
> > @@ -87,8 +87,8 @@ config SND_HDA_PATCH_LOADER
> >
> > config SND_HDA_CODEC_REALTEK
> > tristate "Build Realtek HD-audio codec support"
> > + depends on INPUT
> > select SND_HDA_GENERIC
> > - select INPUT
>
> This would break if INPUT=m and SND_HDA_CODEC_REALTEK=y.
> Usually, we take a trick like
>
> depends on INPUT=y || INPUT=SND_HDA_CODEC_REALTEK
>
> But, looking at the change that introduced the dependency (commit
> 33f4acd3b214), the code doesn't necessarily depend on INPUT at all.
> The select above was put there just because the random build with
> INPUT=m and SND_HDA_CODEC_REALTEK=y would break otherwise.
>
> The right fix in this case would be to replace IS_ENABLE(INPUT) with
> IS_REACHABLE(INPUT) instead.
... that is, a patch like below.
Takashi
-- 8< --
From: Takashi Iwai <tiwai@xxxxxxx>
Subject: [PATCH] ALSA: hda - Use IS_REACHABLE() for dependency on input
The commit ffcd28d88e4f ("ALSA: hda - Select INPUT for Realtek
HD-audio codec") introduced the reverse-selection of CONFIG_INPUT for
Realtek codec in order to avoid the mess with dependency between
built-in and modules. Later on, we obtained IS_REACHABLE() macro
exactly for this kind of problems, and now we can remove th INPUT
selection in Kconfig and put IS_REACHABLE(INPUT) to the appropriate
places in the code, so that the driver doesn't need to select other
subsystem forcibly.
Fixes: ffcd28d88e4f ("ALSA: hda - Select INPUT for Realtek HD-audio codec")
Reported-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
---
sound/pci/hda/Kconfig | 1 -
sound/pci/hda/patch_realtek.c | 5 +++++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 7f3b5ed81995..f7a492c382d9 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -88,7 +88,6 @@ config SND_HDA_PATCH_LOADER
config SND_HDA_CODEC_REALTEK
tristate "Build Realtek HD-audio codec support"
select SND_HDA_GENERIC
- select INPUT
help
Say Y or M here to include Realtek HD-audio codec support in
snd-hda-intel driver, such as ALC880.
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 440972975bd4..9a98c53e0124 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3810,6 +3810,7 @@ static void alc280_fixup_hp_gpio4(struct hda_codec *codec,
}
}
+#if IS_REACHABLE(INPUT)
static void gpio2_mic_hotkey_event(struct hda_codec *codec,
struct hda_jack_callback *event)
{
@@ -3942,6 +3943,10 @@ static void alc233_fixup_lenovo_line2_mic_hotkey(struct hda_codec *codec,
spec->kb_dev = NULL;
}
}
+#else /* INPUT */
+#define alc280_fixup_hp_gpio2_mic_hotkey NULL
+#define alc233_fixup_lenovo_line2_mic_hotkey NULL
+#endif /* INPUT */
static void alc269_fixup_hp_line1_mic1_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
--
2.15.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
