On 01/03/2018 08:50 AM, Pierre-Louis Bossart wrote: > From: Vinod Koul <vinod.koul@xxxxxxxxx> > > Helps in finding if endings That partial sentence is confusing. I couldn't decode it without reading the entire patch. That shouldn't be necessary. How about: Help in finding (matching) if/endif pairs. or Help in finding matching "if" endings by commenting the "endif". > > Signed-off-by: Vinod Koul <vinod.koul@xxxxxxxxx> > Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> > --- > sound/soc/intel/Kconfig | 10 ++++---- > sound/soc/intel/boards/Kconfig | 52 +++++++++++++++++++++--------------------- > 2 files changed, 31 insertions(+), 31 deletions(-) > > diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig > index b75fa5f59b96..801b205662df 100644 > --- a/sound/soc/intel/Kconfig > +++ b/sound/soc/intel/Kconfig > @@ -47,7 +47,7 @@ config SND_SOC_INTEL_SST_FIRMWARE > # when these platforms are enabled > > config SND_SOC_INTEL_HASWELL > - tristate "Intel ASoC SST driver for Haswell/Broadwell" > + tristate "Haswell/Broadwell Platforms" > depends on SND_DMA_SGBUF > depends on DMADEVICES && ACPI > select SND_SOC_INTEL_SST > @@ -60,7 +60,7 @@ config SND_SOC_INTEL_HASWELL > typically used for Chromebooks. This is a recommended option. > > config SND_SOC_INTEL_BAYTRAIL > - tristate "Intel ASoC SST driver for Baytrail (legacy)" > + tristate "Baytrail (legacy) Platforms" > depends on DMADEVICES && ACPI > select SND_SOC_INTEL_SST > select SND_SOC_INTEL_SST_ACPI > @@ -73,7 +73,7 @@ config SND_SOC_INTEL_BAYTRAIL > not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead. > > config SND_SST_ATOM_HIFI2_PLATFORM_PCI > - tristate "Intel ASoC SST driver for PCI HiFi2 platforms (Medfield, Merrifield)" > + tristate "PCI HiFi2 platforms (Medfield, Merrifield) platforms" > depends on X86 && PCI > select SND_SST_IPC_PCI > select SND_SOC_COMPRESS > @@ -87,7 +87,7 @@ config SND_SST_ATOM_HIFI2_PLATFORM_PCI > is not in the standard firmware tree > > config SND_SST_ATOM_HIFI2_PLATFORM > - tristate "Intel ASoC SST driver for ACPI HiFi2 platforms (Baytrail, Cherrytrail)" > + tristate "ACPI HiFi2 platforms (Baytrail, Cherrytrail) Platforms" > depends on X86 && ACPI > select SND_SST_IPC_ACPI > select IOSF_MBI > @@ -99,7 +99,7 @@ config SND_SST_ATOM_HIFI2_PLATFORM > recommended option > > config SND_SOC_INTEL_SKYLAKE > - tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL" > + tristate "SKL/BXT/KBL/GLK/CNL... Platforms" > depends on PCI && ACPI > select SND_HDA_EXT_CORE > select SND_HDA_DSP_LOADER > diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig > index 6a10df882a88..89a73e3d9d2d 100644 > --- a/sound/soc/intel/boards/Kconfig > +++ b/sound/soc/intel/boards/Kconfig > @@ -15,7 +15,7 @@ if SND_SOC_INTEL_MACH > if SND_SST_ATOM_HIFI2_PLATFORM_PCI > > config SND_MFLD_MACHINE > - tristate "SOC Machine Audio driver for Intel Medfield MID platform" > + tristate "Intel Medfield MID" > depends on INTEL_SCU_IPC > select SND_SOC_SN95031 > help > @@ -24,12 +24,12 @@ config SND_MFLD_MACHINE > Say Y if you have such a device. > If unsure select "N". > > -endif > +endif ## SND_SST_ATOM_HIFI2_PLATFORM_PCI > > if SND_SOC_INTEL_HASWELL > > config SND_SOC_INTEL_HASWELL_MACH > - tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint" > + tristate "Haswell Lynxpoint" > depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM > select SND_SOC_RT5640 > help > @@ -39,7 +39,7 @@ config SND_SOC_INTEL_HASWELL_MACH > If unsure select "N". > > config SND_SOC_INTEL_BDW_RT5677_MACH > - tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec" > + tristate "Broadwell with RT5677 codec" > depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM && GPIOLIB > select SND_SOC_RT5677 > help > @@ -49,7 +49,7 @@ config SND_SOC_INTEL_BDW_RT5677_MACH > If unsure select "N". > > config SND_SOC_INTEL_BROADWELL_MACH > - tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint" > + tristate "Intel Broadwell Wildcatpoint" > depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM > select SND_SOC_RT286 > help > @@ -57,12 +57,12 @@ config SND_SOC_INTEL_BROADWELL_MACH > Ultrabook platforms. > Say Y or m if you have such a device. This is a recommended option. > If unsure select "N". > -endif > +endif ## SND_SOC_INTEL_HASWELL > > if SND_SOC_INTEL_BAYTRAIL > > config SND_SOC_INTEL_BYT_MAX98090_MACH > - tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec" > + tristate "Baytrail with MAX98090 codec" > depends on X86_INTEL_LPSS && I2C > select SND_SOC_MAX98090 > help > @@ -72,7 +72,7 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH > functionality. > > config SND_SOC_INTEL_BYT_RT5640_MACH > - tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec" > + tristate "Baytrail with RT5640 codec" > depends on X86_INTEL_LPSS && I2C > select SND_SOC_RT5640 > help > @@ -80,12 +80,12 @@ config SND_SOC_INTEL_BYT_RT5640_MACH > with the RT5640 audio codec. This driver is deprecated, use > SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality. > > -endif > +endif ## SND_SOC_INTEL_BAYTRAIL > > if SND_SST_ATOM_HIFI2_PLATFORM > > config SND_SOC_INTEL_BYTCR_RT5640_MACH > - tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec" > + tristate "Baytrail and Baytrail-CR with RT5640 codec" > depends on X86_INTEL_LPSS && I2C && ACPI > select SND_SOC_ACPI > select SND_SOC_RT5640 > @@ -96,7 +96,7 @@ config SND_SOC_INTEL_BYTCR_RT5640_MACH > If unsure select "N". > > config SND_SOC_INTEL_BYTCR_RT5651_MACH > - tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec" > + tristate "Baytrail and Baytrail-CR with RT5651 codec" > depends on X86_INTEL_LPSS && I2C && ACPI > select SND_SOC_ACPI > select SND_SOC_RT5651 > @@ -107,7 +107,7 @@ config SND_SOC_INTEL_BYTCR_RT5651_MACH > If unsure select "N". > > config SND_SOC_INTEL_CHT_BSW_RT5672_MACH > - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec" > + tristate "Cherrytrail & Braswell with RT5672 codec" > depends on X86_INTEL_LPSS && I2C && ACPI > select SND_SOC_ACPI > select SND_SOC_RT5670 > @@ -118,7 +118,7 @@ config SND_SOC_INTEL_CHT_BSW_RT5672_MACH > If unsure select "N". > > config SND_SOC_INTEL_CHT_BSW_RT5645_MACH > - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec" > + tristate "Cherrytrail & Braswell with RT5645/5650 codec" > depends on X86_INTEL_LPSS && I2C && ACPI > select SND_SOC_ACPI > select SND_SOC_RT5645 > @@ -129,7 +129,7 @@ config SND_SOC_INTEL_CHT_BSW_RT5645_MACH > If unsure select "N". > > config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH > - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with MAX98090 & TI codec" > + tristate "Cherrytrail & Braswell with MAX98090 & TI codec" > depends on X86_INTEL_LPSS && I2C && ACPI > select SND_SOC_MAX98090 > select SND_SOC_TS3A227E > @@ -140,7 +140,7 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH > If unsure select "N". > > config SND_SOC_INTEL_BYT_CHT_DA7213_MACH > - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec" > + tristate "Baytrail & Cherrytrail with DA7212/7213 codec" > depends on X86_INTEL_LPSS && I2C && ACPI > select SND_SOC_ACPI > select SND_SOC_DA7213 > @@ -151,7 +151,7 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH > If unsure select "N". > > config SND_SOC_INTEL_BYT_CHT_ES8316_MACH > - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec" > + tristate "Baytrail & Cherrytrail with ES8316 codec" > depends on X86_INTEL_LPSS && I2C && ACPI > select SND_SOC_ES8316 > help > @@ -161,7 +161,7 @@ config SND_SOC_INTEL_BYT_CHT_ES8316_MACH > If unsure select "N". > > config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH > - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" > + tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" > depends on X86_INTEL_LPSS && I2C && ACPI > help > This adds support for ASoC machine driver for the MinnowBoard Max or > @@ -172,12 +172,12 @@ config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH > > If unsure select "N". > > -endif > +endif ## SND_SST_ATOM_HIFI2_PLATFORM > > if SND_SOC_INTEL_SKYLAKE > > config SND_SOC_INTEL_SKL_RT286_MACH > - tristate "ASoC Audio driver for SKL with RT286 I2S mode" > + tristate "SKL with RT286 I2S mode" > depends on MFD_INTEL_LPSS && I2C && ACPI > select SND_SOC_RT286 > select SND_SOC_DMIC > @@ -189,7 +189,7 @@ config SND_SOC_INTEL_SKL_RT286_MACH > If unsure select "N". > > config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH > - tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode" > + tristate "SKL with NAU88L25 and SSM4567 in I2S Mode" > depends on MFD_INTEL_LPSS && I2C && ACPI > select SND_SOC_NAU8825 > select SND_SOC_SSM4567 > @@ -202,7 +202,7 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH > If unsure select "N". > > config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH > - tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode" > + tristate "SKL with NAU88L25 and MAX98357A in I2S Mode" > depends on MFD_INTEL_LPSS && I2C && ACPI > select SND_SOC_NAU8825 > select SND_SOC_MAX98357A > @@ -215,7 +215,7 @@ config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH > If unsure select "N". > > config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH > - tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode" > + tristate "Broxton with DA7219 and MAX98357A in I2S Mode" > depends on MFD_INTEL_LPSS && I2C && ACPI > select SND_SOC_DA7219 > select SND_SOC_MAX98357A > @@ -229,7 +229,7 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH > If unsure select "N". > > config SND_SOC_INTEL_BXT_RT298_MACH > - tristate "ASoC Audio driver for Broxton with RT298 I2S mode" > + tristate "Broxton with RT298 I2S mode" > depends on MFD_INTEL_LPSS && I2C && ACPI > select SND_SOC_RT298 > select SND_SOC_DMIC > @@ -242,7 +242,7 @@ config SND_SOC_INTEL_BXT_RT298_MACH > If unsure select "N". > > config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH > - tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode" > + tristate "KBL with RT5663 and MAX98927 in I2S Mode" > depends on MFD_INTEL_LPSS && I2C && ACPI > select SND_SOC_RT5663 > select SND_SOC_MAX98927 > @@ -255,7 +255,7 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH > If unsure select "N". > > config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH > - tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode" > + tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode" > depends on MFD_INTEL_LPSS && I2C && SPI && ACPI > select SND_SOC_RT5663 > select SND_SOC_RT5514 > @@ -267,6 +267,6 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH > create an alsa sound card for RT5663 + RT5514 + MAX98927. > Say Y or m if you have such a device. This is a recommended option. > If unsure select "N". > -endif > +endif ## SND_SOC_INTEL_SKYLAKE > > endif ## SND_SOC_INTEL_MACH > -- ~Randy _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
