Never mind. Actually "ASoC: nau8825: disable crosstalk by default" was
already approved.
Reviewed-by: Wu-Cheng Li <wuchengli@xxxxxxxxxxxx>
Tested-by: Wu-Cheng Li <wuchengli@xxxxxxxxxxxx>
On Thu, Nov 30, 2017 at 10:30 AM, Wu-Cheng Li (李務誠)
<wuchengli@xxxxxxxxxx> wrote:
> Can you combine this patch with "ASoC: nau8825: disable crosstalk by
> default"? This should be a part of that patch.
>
> On Thu, Nov 30, 2017 at 10:13 AM, John Hsu <KCHSU0@xxxxxxxxxxx> wrote:
>> Although the crosstalk is disabled, it is better to set clear_irq
>> properly when the impedance measurement interrupt happens.
>> It can avoid that the driver clears other IRQs by accident
>> if the active_irq has another IRQ events.
>>
>> Signed-off-by: John Hsu <KCHSU0@xxxxxxxxxxx>
>> ---
>> sound/soc/codecs/nau8825.c | 5 ++---
>> 1 file changed, 2 insertions(+), 3 deletions(-)
>>
>> diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
>> index d3c1a02..603cd72 100644
>> --- a/sound/soc/codecs/nau8825.c
>> +++ b/sound/soc/codecs/nau8825.c
>> @@ -1733,10 +1733,9 @@ static irqreturn_t nau8825_interrupt(int irq, void *data)
>> nau8825->xtalk_event_mask = event_mask;
>> }
>> } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) {
>> - if (nau8825->xtalk_enable) {
>> + if (nau8825->xtalk_enable)
>> schedule_work(&nau8825->xtalk_work);
>> - clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ;
>> - }
>> + clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ;
>> } else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) ==
>> NAU8825_JACK_INSERTION_DETECTED) {
>> /* One more step to check GPIO status directly. Thus, the
>> --
>> 2.6.4
>>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
