On 11/27/2017 2:12 PM, Wu-Cheng Li (李務誠) wrote:
On Fri, Nov 24, 2017 at 6:08 PM, John Hsu <KCHSU0@xxxxxxxxxxx> wrote:The driver makes the crosstalk funciton disabled by default which can simplify the codec function. The platform may not need this funciton and reduce the potential risk. Therefore, We change the property "nuvoton,crosstalk-bypass" to "nuvoton,crosstalk-enable". The crosstalk measurement is enabled if the property is set. Otherwise, it is disabled. Besides, add more condition in the entry point of the crosstalk sequence to disable the function completely. Signed-off-by: John Hsu <KCHSU0@xxxxxxxxxxx> --- .../devicetree/bindings/sound/nau8825.txt | 4 ++-- sound/soc/codecs/nau8825.c | 23 ++++++++++++---------- sound/soc/codecs/nau8825.h | 2 +- 3 files changed, 16 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt index 2f5e973..d16d968 100644 --- a/Documentation/devicetree/bindings/sound/nau8825.txt +++ b/Documentation/devicetree/bindings/sound/nau8825.txt @@ -69,7 +69,7 @@ Optional properties: - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - nuvoton,crosstalk-bypass: make crosstalk function bypass if set. + - nuvoton,crosstalk-enable: make crosstalk function enable if set. - clocks: list of phandle and clock specifier pairs according to common clock bindings for the clocks described in clock-names @@ -98,7 +98,7 @@ Example: nuvoton,short-key-debounce = <2>; nuvoton,jack-insert-debounce = <7>; nuvoton,jack-eject-debounce = <7>; - nuvoton,crosstalk-bypass; + nuvoton,crosstalk-enable; clock-names = "mclk"; clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>; diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 714ce17..d3c1a02 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -815,11 +815,12 @@ static void nau8825_xtalk_work(struct work_struct *work) static void nau8825_xtalk_cancel(struct nau8825 *nau8825) { - /* If the xtalk_protect is true, that means the process is still - * on going. The driver forces to cancel the cross talk task and + /* If the crosstalk is eanbled and the process is on going,s/eanbled/enabled/+ * the driver forces to cancel the crosstalk task and * restores the configuration to original status. */ - if (nau8825->xtalk_protect) { + if (nau8825->xtalk_enable && nau8825->xtalk_state != + NAU8825_XTALK_DONE) { cancel_work_sync(&nau8825->xtalk_work); nau8825_xtalk_clean(nau8825); } @@ -1686,7 +1687,7 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) { if (nau8825_is_jack_inserted(regmap)) { event |= nau8825_jack_insert(nau8825); - if (!nau8825->xtalk_bypass && !nau8825->high_imped) { + if (nau8825->xtalk_enable && !nau8825->high_imped) { /* Apply the cross talk suppression in the * headset without high impedance. */ @@ -1732,8 +1733,10 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) nau8825->xtalk_event_mask = event_mask; } } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) { - schedule_work(&nau8825->xtalk_work); - clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; + if (nau8825->xtalk_enable) { + schedule_work(&nau8825->xtalk_work); + clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; + }Shouldn't we still set clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ if crosstalk is disabled? Otherwise, all active_irq will be disabled later in this function.
Actually, there is assignment about clear_irq before the end of ISR as follows: if (!clear_irq) clear_irq = active_irq; The IRQ will still be cleared. Your comment is correct for the clear semantic. But the IRQ will never happen if the crosstalk disabled, because the IRQ is triggered in the crosstalk sequence.
} else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) == NAU8825_JACK_INSERTION_DETECTED) { /* One more step to check GPIO status directly. Thus, the @@ -2440,8 +2443,8 @@ static void nau8825_print_device_properties(struct nau8825 *nau8825) nau8825->jack_insert_debounce); dev_dbg(dev, "jack-eject-debounce: %d\n", nau8825->jack_eject_debounce); - dev_dbg(dev, "crosstalk-bypass: %d\n", - nau8825->xtalk_bypass); + dev_dbg(dev, "crosstalk-enable: %d\n", + nau8825->xtalk_enable); } static int nau8825_read_device_properties(struct device *dev, @@ -2506,8 +2509,8 @@ static int nau8825_read_device_properties(struct device *dev, &nau8825->jack_eject_debounce); if (ret) nau8825->jack_eject_debounce = 0; - nau8825->xtalk_bypass = device_property_read_bool(dev, - "nuvoton,crosstalk-bypass"); + nau8825->xtalk_enable = device_property_read_bool(dev, + "nuvoton,crosstalk-enable"); nau8825->mclk = devm_clk_get(dev, "mclk"); if (PTR_ERR(nau8825->mclk) == -EPROBE_DEFER) { diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index 8aee5c86..199d6ea 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -476,7 +476,7 @@ struct nau8825 { int xtalk_event_mask; bool xtalk_protect; int imp_rms[NAU8825_XTALK_IMM]; - int xtalk_bypass; + int xtalk_enable; }; int nau8825_enable_jack_detect(struct snd_soc_codec *codec, -- 2.6.4
=========================================================================================== The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
