Hi,
On Nov 24 2017 08:31, Maciej S. Szmigiero wrote:
This format is similar to existing SNDRV_PCM_FORMAT_{S,U}20_3 that keep
20-bit PCM samples in 3 bytes, however i.MX6 platform SSI FIFO does not
allow 3-byte accesses (including DMA) so a 4-byte (more conventional)
format is needed for it.
Signed-off-by: Maciej S. Szmigiero <mail@xxxxxxxxxxxxxxxxxxxxx>
---
Changes from v1: Drop "_4" suffix from these formats since they aren't
non-standard ones, use empty format slots starting from format number 25
for them, add information that they are LSB justified formats.
Corresponding alsa-lib changes will be posted as soon as this patch is
merged on the kernel side, to keep alsa-lib and kernel synchronized.
include/sound/pcm.h | 8 ++++++++
include/sound/soc-dai.h | 2 ++
include/uapi/sound/asound.h | 9 +++++++++
sound/core/pcm_misc.c | 16 ++++++++++++++++
4 files changed, 35 insertions(+)
...
diff --git a/sound/core/pcm_misc.c b/sound/core/pcm_misc.c
index 9be81025372f..c62bfe27106f 100644
--- a/sound/core/pcm_misc.c
+++ b/sound/core/pcm_misc.c
@@ -170,6 +170,22 @@ static struct pcm_format_data pcm_formats[(INT)SNDRV_PCM_FORMAT_LAST+1] = {
[SNDRV_PCM_FORMAT_GSM] = {
.le = -1, .signd = -1,
},
+ [SNDRV_PCM_FORMAT_S20_LE] = {
+ .width = 20, .phys = 32, .le = 1, .signd = 1,
+ .silence = {},
+ },
+ [SNDRV_PCM_FORMAT_S20_BE] = {
+ .width = 20, .phys = 32, .le = 0, .signd = 1,
+ .silence = {},
+ },
+ [SNDRV_PCM_FORMAT_U20_LE] = {
+ .width = 20, .phys = 32, .le = 1, .signd = 0,
+ .silence = { 0x00, 0x00, 0x08, 0x00 },
+ },
+ [SNDRV_PCM_FORMAT_U20_BE] = {
+ .width = 20, .phys = 32, .le = 0, .signd = 0,
+ .silence = { 0x00, 0x08, 0x00, 0x00 },
+ },
[SNDRV_PCM_FORMAT_SPECIAL] = {
.le = -1, .signd = -1,
},
Before applying this patch:
166 /* FIXME: the following three formats are not defined
properly yet */
167 [SNDRV_PCM_FORMAT_MPEG] = {
168 .le = -1, .signd = -1,
169 },
170 [SNDRV_PCM_FORMAT_GSM] = {
171 .le = -1, .signd = -1,
172 },
173 [SNDRV_PCM_FORMAT_SPECIAL] = {
174 .le = -1, .signd = -1,
175 },
After applying this patch:
166 /* FIXME: the following three formats are not defined
properly yet */
167 [SNDRV_PCM_FORMAT_MPEG] = {
168 .le = -1, .signd = -1,
169 },
170 [SNDRV_PCM_FORMAT_GSM] = {
171 .le = -1, .signd = -1,
172 },
173 [SNDRV_PCM_FORMAT_S20_LE] = {
174 .width = 20, .phys = 32, .le = 1, .signd = 1,
175 .silence = {},
176 },
177 [SNDRV_PCM_FORMAT_S20_BE] = {
178 .width = 20, .phys = 32, .le = 0, .signd = 1,
179 .silence = {},
180 },
181 [SNDRV_PCM_FORMAT_U20_LE] = {
182 .width = 20, .phys = 32, .le = 1, .signd = 0,
183 .silence = { 0x00, 0x00, 0x08, 0x00 },
184 },
185 [SNDRV_PCM_FORMAT_U20_BE] = {
186 .width = 20, .phys = 32, .le = 0, .signd = 0,
187 .silence = { 0x00, 0x08, 0x00, 0x00 },
188 },
189 [SNDRV_PCM_FORMAT_SPECIAL] = {
190 .le = -1, .signd = -1,
191 },
I think it good to add an alternative comment for each of entry which is
not defined yet, like:
-> 166 /* FIXME: this format is not defined properly yet */
167 [SNDRV_PCM_FORMAT_MPEG] = {
168 .le = -1, .signd = -1,
169 },
-> 170 /* FIXME: this format is not defined properly yet */
171 [SNDRV_PCM_FORMAT_GSM] = {
172 .le = -1, .signd = -1,
173 },
174 [SNDRV_PCM_FORMAT_S20_LE] = {
175 .width = 20, .phys = 32, .le = 1, .signd = 1,
176 .silence = {},
177 },
178 [SNDRV_PCM_FORMAT_S20_BE] = {
179 .width = 20, .phys = 32, .le = 0, .signd = 1,
180 .silence = {},
181 },
182 [SNDRV_PCM_FORMAT_U20_LE] = {
183 .width = 20, .phys = 32, .le = 1, .signd = 0,
184 .silence = { 0x00, 0x00, 0x08, 0x00 },
185 },
186 [SNDRV_PCM_FORMAT_U20_BE] = {
187 .width = 20, .phys = 32, .le = 0, .signd = 0,
188 .silence = { 0x00, 0x08, 0x00, 0x00 },
189 },
-> 190 /* FIXME: this format is not defined properly yet */
191 [SNDRV_PCM_FORMAT_SPECIAL] = {
192 .le = -1, .signd = -1,
193 },
Regards
Takashi Sakamoto
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
