When an interrupt occurs, the value of at least one of the belonging
controls should have changed. To make sure they get re-read from device
on the next read, invalidate the cache. This was correctly implemented
for uac2 already, but missing for uac1.
Signed-off-by: Julian Scheel <julian@xxxxxxxx>
---
sound/usb/mixer.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 91bc8f18791e..1beb5b4d027e 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2330,9 +2330,14 @@ void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid)
{
struct usb_mixer_elem_list *list;
- for (list = mixer->id_elems[unitid]; list; list = list->next_id_elem)
+ for (list = mixer->id_elems[unitid]; list; list = list->next_id_elem) {
+ struct usb_mixer_elem_info *info =
+ (struct usb_mixer_elem_info *)list;
+ /* invalidate cache, so the value is read from the device */
+ info->cached = 0;
snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
&list->kctl->id);
+ }
}
static void snd_usb_mixer_dump_cval(struct snd_info_buffer *buffer,
--
2.15.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
