Sample rates are only restricted by the capabilities of the
clock driver, so use SNDRV_PCM_RATE_CONTINUOUS instead of
SNDRV_PCM_RATE_8000_192000.
Tests (eg with pcm5122) have shown that bcm2835 works fine
in 384kHz/32bit stereo mode, so change the maximum allowed
rate from 192kHz to 384kHz.
Signed-off-by: Matthias Reichl <hias@xxxxxxxxx>
---
sound/soc/bcm/bcm2835-i2s.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
index 3a706fda4f39..43f5715a0d5d 100644
--- a/sound/soc/bcm/bcm2835-i2s.c
+++ b/sound/soc/bcm/bcm2835-i2s.c
@@ -765,7 +765,9 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = {
.playback = {
.channels_min = 2,
.channels_max = 2,
- .rates = SNDRV_PCM_RATE_8000_192000,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 8000,
+ .rate_max = 384000,
.formats = SNDRV_PCM_FMTBIT_S16_LE
| SNDRV_PCM_FMTBIT_S24_LE
| SNDRV_PCM_FMTBIT_S32_LE
@@ -773,7 +775,9 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = {
.capture = {
.channels_min = 2,
.channels_max = 2,
- .rates = SNDRV_PCM_RATE_8000_192000,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 8000,
+ .rate_max = 384000,
.formats = SNDRV_PCM_FMTBIT_S16_LE
| SNDRV_PCM_FMTBIT_S24_LE
| SNDRV_PCM_FMTBIT_S32_LE
--
2.11.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
