From: Sriram Periyasamy <sriramx.periyasamy@xxxxxxxxx> On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake, KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital Converter Control #3 needs to be set explicitly for HDMI/DisplayPort High Bit Rate (HBR) audio playback to work. This was not required in earlier platforms when HBR was first introduced. The ICT bits are defined in Section 7.3.3.9 of the HDaudio 1.0a specification. Since the ICT bitfield was not specified for HDAudio 1.0 devices (before 2009), we only program it on machines more recent than Haswell. We tested that this fix is not needed on Baytrail-I (MinnowBoard Turbot) and believe by extension it also does not apply to Braswell. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797 Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@xxxxxxxxx> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@xxxxxxxxx> --- v2: move digi3 verb in Set section, only set ICT for haswell and newer include/sound/hda_verbs.h | 1 + sound/pci/hda/patch_hdmi.c | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/include/sound/hda_verbs.h b/include/sound/hda_verbs.h index d0509db6d0ec..d2004d7feb2b 100644 --- a/include/sound/hda_verbs.h +++ b/include/sound/hda_verbs.h @@ -54,6 +54,7 @@ enum { #define AC_VERB_GET_EAPD_BTLENABLE 0x0f0c #define AC_VERB_GET_DIGI_CONVERT_1 0x0f0d #define AC_VERB_GET_DIGI_CONVERT_2 0x0f0e /* unused */ +#define AC_VERB_SET_DIGI_CONVERT_3 0x73e #define AC_VERB_GET_VOLUME_KNOB_CONTROL 0x0f0f /* f10-f1a: GPIO */ #define AC_VERB_GET_GPIO_DATA 0x0f15 diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 53f9311370de..8566de298ea3 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -906,6 +906,7 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, hda_nid_t pin_nid, u32 stream_tag, int format) { struct hdmi_spec *spec = codec->spec; + unsigned int param; int err; err = spec->ops.pin_hbr_setup(codec, pin_nid, is_hbr_format(format)); @@ -915,6 +916,26 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, return err; } + if (is_haswell_plus(codec)) { + + /* + * on recent platforms IEC Coding Type is required for HBR + * support, read current Digital Converter settings and set + * ICT bitfield if needed. + */ + param = snd_hda_codec_read(codec, cvt_nid, 0, + AC_VERB_GET_DIGI_CONVERT_1, 0); + + param = (param >> 16) & ~(AC_DIG3_ICT); + + /* on recent platforms ICT mode is required for HBR support */ + if (is_hbr_format(format)) + param |= 0x1; + + snd_hda_codec_write(codec, cvt_nid, 0, + AC_VERB_SET_DIGI_CONVERT_3, param); + } + snd_hda_codec_setup_stream(codec, cvt_nid, stream_tag, 0, format); return 0; } -- 2.11.0 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
