From: Sriram Periyasamy <sriramx.periyasamy@xxxxxxxxx> On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake, KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital Converter Control #3 needs to be set explicitly for HDMI/DisplayPort High Bit Rate (HBR) audio playback to work. This was not required in earlier platforms when HBR was first introduced. The ICT bits are defined in Section 7.3.3.9 of the HDaudio 1.0a specification. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797 Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@xxxxxxxxx> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@xxxxxxxxx> --- include/sound/hda_verbs.h | 1 + sound/pci/hda/patch_hdmi.c | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+) diff --git a/include/sound/hda_verbs.h b/include/sound/hda_verbs.h index d0509db6d0ec..d2004d7feb2b 100644 --- a/include/sound/hda_verbs.h +++ b/include/sound/hda_verbs.h @@ -54,6 +54,7 @@ enum { #define AC_VERB_GET_EAPD_BTLENABLE 0x0f0c #define AC_VERB_GET_DIGI_CONVERT_1 0x0f0d #define AC_VERB_GET_DIGI_CONVERT_2 0x0f0e /* unused */ +#define AC_VERB_SET_DIGI_CONVERT_3 0x73e #define AC_VERB_GET_VOLUME_KNOB_CONTROL 0x0f0f /* f10-f1a: GPIO */ #define AC_VERB_GET_GPIO_DATA 0x0f15 diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 53f9311370de..2dcd99d2a757 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -906,6 +906,7 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, hda_nid_t pin_nid, u32 stream_tag, int format) { struct hdmi_spec *spec = codec->spec; + unsigned int param; int err; err = spec->ops.pin_hbr_setup(codec, pin_nid, is_hbr_format(format)); @@ -915,6 +916,23 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, return err; } + /* + * on recent platforms IEC Coding Type is required for HBR support, + * read current Digital Converter settings and set ICT bitfield if + * needed. + */ + param = snd_hda_codec_read(codec, cvt_nid, 0, + AC_VERB_GET_DIGI_CONVERT_1, 0); + + param = (param >> 16) & ~(AC_DIG3_ICT); + + /* on recent platforms ICT mode is required for HBR support */ + if (is_hbr_format(format)) + param |= 0x1; + + snd_hda_codec_write(codec, cvt_nid, 0, + AC_VERB_SET_DIGI_CONVERT_3, param); + snd_hda_codec_setup_stream(codec, cvt_nid, stream_tag, 0, format); return 0; } -- 1.9.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
