Re: [PATCH] ASoC: rt5514: Revert Hotword Model control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sep 15 2017 13:32, Hsin-Yu Chao wrote:
This reverts commit eb33869c7206 ("ASoC: rt5514: Guard Hotword Model bytes
loading") and commit d18420b0a0b8 ("ASoC: rt5514: expose Hotword Model
control")

It is discouraged to use SND_SOC_BYTES_TLV to load arbitrary bytes from
userspace to driver. Removing the 'Hotword Model' control until we have
a good way to verify the content of hotword model blobs.

Signed-off-by: Hsin-Yu Chao <hychao@xxxxxxxxxxxx>
---
  sound/soc/codecs/rt5514.c | 63 -----------------------------------------------
  sound/soc/codecs/rt5514.h |  3 ---
  2 files changed, 66 deletions(-)

Reviewed-by: Takashi Sakamoto <o-takashi@xxxxxxxxxxxxx>

I reviewed this patch on 8bc23183b6fe ('Merge remote-tracking branches 'asoc/fix/adau17x1', 'asoc/fix/rockchip', 'asoc/fix/rt5514' and 'asoc/fix/samsung' into asoc-linus') in Mark's tree.

For the issue I mentioned[1], please have discussions with Intel developers (especially Vinod Koul) and authors of 'sound/soc/codecs/wm_adsp.c' and find better solution for yours.

I note that ALSA hwdep interface for userspace includes 'SNDRV_HWDEP_IOCTL_DSP_LOAD' ioctl(2) command to load binary blob from userspace.

diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c
index 250581082e9d..a2722177470e 100644
--- a/sound/soc/codecs/rt5514.c
+++ b/sound/soc/codecs/rt5514.c
@@ -335,39 +335,6 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol,
  				fw = NULL;
  			}
- if (rt5514->model_buf && rt5514->model_len) {
-#if IS_ENABLED(CONFIG_SND_SOC_RT5514_SPI)
-				int ret;
-
-				ret = rt5514_spi_burst_write(0x4ff80000,
-					rt5514->model_buf,
-					((rt5514->model_len / 8) + 1) * 8);
-				if (ret) {
-					dev_err(codec->dev,
-						"Model load failed %d\n", ret);
-					return ret;
-				}
-#else
-				dev_err(codec->dev,
-					"No SPI driver for loading firmware\n");
-#endif
-			} else {
-				request_firmware(&fw, RT5514_FIRMWARE3,
-						 codec->dev);
-				if (fw) {
-#if IS_ENABLED(CONFIG_SND_SOC_RT5514_SPI)
-					rt5514_spi_burst_write(0x4ff80000,
-						fw->data,
-						((fw->size/8)+1)*8);
-#else
-					dev_err(codec->dev,
-						"No SPI driver to load fw\n");
-#endif
-					release_firmware(fw);
-					fw = NULL;
-				}
-			}
-
  			/* DSP run */
  			regmap_write(rt5514->i2c_regmap, 0x18002f00,
  				0x00055148);
@@ -382,34 +349,6 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol,
  	return 0;
  }
-static int rt5514_hotword_model_put(struct snd_kcontrol *kcontrol,
-		const unsigned int __user *bytes, unsigned int size)
-{
-	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
-	struct rt5514_priv *rt5514 = snd_soc_component_get_drvdata(component);
-	struct snd_soc_codec *codec = rt5514->codec;
-	int ret = 0;
-
-	if (rt5514->model_buf || rt5514->model_len < size) {
-		if (rt5514->model_buf)
-			devm_kfree(codec->dev, rt5514->model_buf);
-		rt5514->model_buf = devm_kmalloc(codec->dev, size, GFP_KERNEL);
-		if (!rt5514->model_buf) {
-			ret = -ENOMEM;
-			goto done;
-		}
-	}
-
-	/* Skips the TLV header. */
-	bytes += 2;
-
-	if (copy_from_user(rt5514->model_buf, bytes, size))
-		ret = -EFAULT;
-done:
-	rt5514->model_len = (ret ? 0 : size);
-	return ret;
-}
-
  static const struct snd_kcontrol_new rt5514_snd_controls[] = {
  	SOC_DOUBLE_TLV("MIC Boost Volume", RT5514_ANA_CTRL_MICBST,
  		RT5514_SEL_BSTL_SFT, RT5514_SEL_BSTR_SFT, 8, 0, bst_tlv),
@@ -421,8 +360,6 @@ static const struct snd_kcontrol_new rt5514_snd_controls[] = {
  		adc_vol_tlv),
  	SOC_SINGLE_EXT("DSP Voice Wake Up", SND_SOC_NOPM, 0, 1, 0,
  		rt5514_dsp_voice_wake_up_get, rt5514_dsp_voice_wake_up_put),
-	SND_SOC_BYTES_TLV("Hotword Model", 0x8504,
-		NULL, rt5514_hotword_model_put),
  };
/* ADC Mixer*/
diff --git a/sound/soc/codecs/rt5514.h b/sound/soc/codecs/rt5514.h
index 07475a9918d2..02bc212a86d9 100644
--- a/sound/soc/codecs/rt5514.h
+++ b/sound/soc/codecs/rt5514.h
@@ -236,7 +236,6 @@
#define RT5514_FIRMWARE1 "rt5514_dsp_fw1.bin"
  #define RT5514_FIRMWARE2	"rt5514_dsp_fw2.bin"
-#define RT5514_FIRMWARE3	"rt5514_dsp_fw3.bin"
/* System Clock Source */
  enum {
@@ -263,8 +262,6 @@ struct rt5514_priv {
  	int pll_in;
  	int pll_out;
  	int dsp_enabled;
-	u8 *model_buf;
-	unsigned int model_len;
  };
#endif /* __RT5514_H__ */


[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2017-September/125474.html

Regards

Takashi Sakamoto
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux