On Sun, Sep 03, 2017 at 01:05:01PM +0200, Lukasz Majewski wrote:
> The problem is visible in the following setup (on the imx6q):
> "simple-audio-card" -> ssi2 -> I2S + I2C -> codec
>
> The function call log (simple-card probe -> CONFIG_SND_SIMPLE_CARD):
>
> asoc_simple_card_init_dai() @ sound/soc/generic/simple-card-utils.c
> snd_soc_dai_set_sysclk()
> fsl_ssi_set_dai_sysclk() @ sound/soc/fsl/fsl_ssi.c
>
> The last call is changing the bit clock (BCLK) frequency to SSI's IP
> block clock (ipg = 66 MHz) [1].
I think a bigger question here is why the routine sets BCLK to 66MHz.
> This is wrong, since IMX SSI block requires the I2S BCLK to be less
> than 1/5 of [1].
>
> As a result the driver initialization passes without any errors, but the
> speaker-test test case breaks.
>
> This commit checks if the fsl_ssi_set_dai_sysclk() frequency passed is
> not equal to [1].
I don't feel it's quite comprehensive...what if it's being set to 67MHz.
Thanks
Nicolin
> Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
> ---
> sound/soc/fsl/fsl_ssi.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> index 173cb84..1186fa9 100644
> --- a/sound/soc/fsl/fsl_ssi.c
> +++ b/sound/soc/fsl/fsl_ssi.c
> @@ -809,6 +809,8 @@ static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
> int clk_id, unsigned int freq, int dir)
> {
> struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
> + if (clk_get_rate(ssi_private->clk) == freq)
> + return 0;
>
> ssi_private->bitclk_freq = freq;
>
> --
> 2.1.4
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
