Jack is not detected by default, using jdmode=3 works fine
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
---
sound/soc/codecs/rt5670.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c
index e56c12a..9545764 100644
--- a/sound/soc/codecs/rt5670.c
+++ b/sound/soc/codecs/rt5670.c
@@ -2851,6 +2851,17 @@ static const struct dmi_system_id dmi_platform_intel_bytcht_jdmode2[] = {
{}
};
+static const struct dmi_system_id dmi_platform_intel_bytcht_jdmode3[] = {
+ {
+ .ident = "Dell Venue 8 Pro 5855",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5855"),
+ },
+ },
+ {}
+};
+
static int rt5670_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -2880,6 +2891,11 @@ static int rt5670_i2c_probe(struct i2c_client *i2c,
rt5670->pdata.dmic1_data_pin = RT5670_DMIC_DATA_IN2P;
rt5670->pdata.dev_gpio = true;
rt5670->pdata.jd_mode = 2;
+ } else if (dmi_check_system(dmi_platform_intel_bytcht_jdmode3)) {
+ rt5670->pdata.dmic_en = true;
+ rt5670->pdata.dmic1_data_pin = RT5670_DMIC_DATA_IN2P;
+ rt5670->pdata.dev_gpio = true;
+ rt5670->pdata.jd_mode = 3;
}
rt5670->regmap = devm_regmap_init_i2c(i2c, &rt5670_regmap);
--
2.9.3
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
