Re: [linux-sunxi] [PATCH v3 05/12] ASoC: sun4i-i2s: Add regmap fields for channels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jul 29, 2017 at 10:17 PM,  <codekipper@xxxxxxxxx> wrote:
> From: Marcus Cooper <codekipper@xxxxxxxxx>
>
> On the original i2s block the channel mapping and selection were
> configured for stereo audio by default: This is not the case with
> the newer SoCs and they are also located at different offsets.
>
> To support the newer SoC then regmap fields have been added to the
> quirks and these are initialised to their correct settings during
> probing.
>
> Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
> ---
>  sound/soc/sunxi/sun4i-i2s.c | 80 ++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 72 insertions(+), 8 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index 2a25df22c2f8..120f797a38e8 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -82,7 +82,7 @@
>  #define SUN4I_I2S_TX_CNT_REG           0x2c
>
>  #define SUN4I_I2S_TX_CHAN_SEL_REG      0x30
> -#define SUN4I_I2S_TX_CHAN_SEL(num_chan)                (((num_chan) - 1) << 0)
> +#define SUN4I_I2S_CHAN_SEL(num_chan)           (((num_chan) - 1) << 0)
>
>  #define SUN4I_I2S_TX_CHAN_MAP_REG      0x34
>  #define SUN4I_I2S_TX_CHAN_MAP(chan, sample)    ((sample) << (chan << 2))
> @@ -98,6 +98,10 @@
>   * @sun4i_i2s_regmap: regmap config to use.
>   * @mclk_offset: Value by which mclkdiv needs to be adjusted.
>   * @bclk_offset: Value by which bclkdiv needs to be adjusted.
> + * @field_txchanmap: location of the tx channel mapping register.
> + * @field_rxchanmap: location of the rx channel mapping register.
> + * @field_txchansel: location of the tx channel select bit fields.
> + * @field_rxchansel: location of the rx channel select bit fields.
>   */
>  struct sun4i_i2s_quirks {
>         bool                            has_reset;
> @@ -105,6 +109,12 @@ struct sun4i_i2s_quirks {
>         const struct regmap_config      *sun4i_i2s_regmap;
>         unsigned int                    mclk_offset;
>         unsigned int                    bclk_offset;
> +
> +       /* Register fields for i2s */
> +       struct reg_field                field_txchanmap;
> +       struct reg_field                field_rxchanmap;
> +       struct reg_field                field_txchansel;
> +       struct reg_field                field_rxchansel;
>  };
>
>  struct sun4i_i2s {
> @@ -118,6 +128,12 @@ struct sun4i_i2s {
>         struct snd_dmaengine_dai_dma_data       capture_dma_data;
>         struct snd_dmaengine_dai_dma_data       playback_dma_data;
>
> +       /* Register fields for i2s */
> +       struct regmap_field     *field_txchanmap;
> +       struct regmap_field     *field_rxchanmap;
> +       struct regmap_field     *field_txchansel;
> +       struct regmap_field     *field_rxchansel;
> +
>         const struct sun4i_i2s_quirks   *variant;
>  };
>
> @@ -264,6 +280,18 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
>         if (params_channels(params) != 2)
>                 return -EINVAL;
>
> +       /* Map the channels for playback and capture */
> +       regmap_field_write(i2s->field_txchanmap, 0x76543210);
> +       regmap_field_write(i2s->field_rxchanmap, 0x00003210);
> +
> +       /* Configure the channels */
> +       regmap_field_write(i2s->field_txchansel,
> +                          SUN4I_I2S_CHAN_SEL(params_channels(params)));
> +
> +       regmap_field_write(i2s->field_rxchansel,
> +                          SUN4I_I2S_CHAN_SEL(params_channels(params)));
> +
> +

Checkpatch says don't use multiple blank lines.

>         switch (params_physical_width(params)) {
>         case 16:
>                 width = DMA_SLAVE_BUSWIDTH_2_BYTES;
> @@ -486,13 +514,6 @@ static int sun4i_i2s_startup(struct snd_pcm_substream *substream,
>                            SUN4I_I2S_CTRL_SDO_EN_MASK,
>                            SUN4I_I2S_CTRL_SDO_EN(0));
>
> -       /* Enable the first two channels */
> -       regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_SEL_REG,
> -                    SUN4I_I2S_TX_CHAN_SEL(2));
> -
> -       /* Map them to the two first samples coming in */
> -       regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_MAP_REG,
> -                    SUN4I_I2S_TX_CHAN_MAP(0, 0) | SUN4I_I2S_TX_CHAN_MAP(1, 1));
>
>         return clk_prepare_enable(i2s->mod_clk);
>  }
> @@ -677,14 +698,51 @@ static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = {
>         .has_reset              = false,
>         .reg_offset_txdata      = SUN4I_I2S_FIFO_TX_REG,
>         .sun4i_i2s_regmap       = &sun4i_i2s_regmap_config,
> +       .field_txchanmap        = REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
> +       .field_rxchanmap        = REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
> +       .field_txchansel        = REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
> +       .field_rxchansel        = REG_FIELD(SUN4I_I2S_RX_CHAN_SEL_REG, 0, 2),
>  };
>
>  static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
>         .has_reset              = true,
>         .reg_offset_txdata      = SUN4I_I2S_FIFO_TX_REG,
>         .sun4i_i2s_regmap       = &sun4i_i2s_regmap_config,
> +       .field_txchanmap        = REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
> +       .field_rxchanmap        = REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
> +       .field_txchansel        = REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
> +       .field_rxchansel        = REG_FIELD(SUN4I_I2S_RX_CHAN_SEL_REG, 0, 2),
>  };
>
> +static int sun4i_i2s_init_regmap_fields(struct device *dev, struct sun4i_i2s *i2s)

This line is over 80 characters. Please wrap the line.

> +{
> +       i2s->field_txchanmap =
> +               devm_regmap_field_alloc(dev, i2s->regmap,
> +                                       i2s->variant->field_txchanmap);
> +       if (IS_ERR(i2s->field_txchanmap))
> +               return PTR_ERR(i2s->field_txchanmap);
> +
> +       i2s->field_rxchanmap =
> +               devm_regmap_field_alloc(dev, i2s->regmap,
> +                                       i2s->variant->field_rxchanmap);
> +       if (IS_ERR(i2s->field_rxchanmap))
> +               return PTR_ERR(i2s->field_rxchanmap);
> +
> +       i2s->field_txchansel =
> +               devm_regmap_field_alloc(dev, i2s->regmap,
> +                                       i2s->variant->field_txchansel);
> +       if (IS_ERR(i2s->field_txchansel))
> +               return PTR_ERR(i2s->field_txchansel);
> +
> +       i2s->field_rxchansel =
> +               devm_regmap_field_alloc(dev, i2s->regmap,
> +                                       i2s->variant->field_rxchansel);
> +       if (IS_ERR(i2s->field_rxchansel))
> +               return PTR_ERR(i2s->field_rxchansel);
> +
> +       return 0;

This seems to be the last "if (IS_ERR()) return PTR_ERR()" sequence.
So it looks like you could apply the PTR_ERR_OR_ZERO hunk from the
kbuild test robot. I wasn't aware of this preference before, and to
be honest I'm fine either way.

Otherwise,

Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>


> +}
> +
>  static int sun4i_i2s_probe(struct platform_device *pdev)
>  {
>         struct sun4i_i2s *i2s;
> @@ -778,6 +836,12 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
>                 goto err_suspend;
>         }
>
> +       ret = sun4i_i2s_init_regmap_fields(&pdev->dev, i2s);
> +       if (ret) {
> +               dev_err(&pdev->dev, "Could not initialise regmap fields\n");
> +               goto err_suspend;
> +       }
> +
>         return 0;
>
>  err_suspend:
> --
> 2.13.3
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> For more options, visit https://groups.google.com/d/optout.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux