Hi Jaechul,
On 2017년 07월 05일 14:58, Jaechul Lee wrote:
> This driver can support more frequencies over 96KHz. There are no reasons
> to limit the frequency range below 96KHz. If codecs/amps or something else
> can't support high resolution rates, the constraints would be set rates
> properly because each drivers have its own limits.
>
> Signed-off-by: Jaechul Lee <jcsing.lee@xxxxxxxxxxx>
> ---
> sound/soc/samsung/i2s.c | 19 +++++++++++++++----
> 1 file changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
> index af3ba4d4ccc5..fc34af6a2c1e 100644
> --- a/sound/soc/samsung/i2s.c
> +++ b/sound/soc/samsung/i2s.c
> @@ -50,6 +50,7 @@ struct samsung_i2s_variant_regs {
>
> struct samsung_i2s_dai_data {
> u32 quirks;
> + unsigned int rates;
> const struct samsung_i2s_variant_regs *i2s_variant_regs;
> };
>
> @@ -1076,20 +1077,25 @@ static const struct snd_soc_component_driver samsung_i2s_component = {
> .name = "samsung-i2s",
> };
>
> -#define SAMSUNG_I2S_RATES SNDRV_PCM_RATE_8000_96000
> -
> #define SAMSUNG_I2S_FMTS (SNDRV_PCM_FMTBIT_S8 | \
> SNDRV_PCM_FMTBIT_S16_LE | \
> SNDRV_PCM_FMTBIT_S24_LE)
>
> static struct i2s_dai *i2s_alloc_dai(struct platform_device *pdev, bool sec)
> {
> + const struct samsung_i2s_dai_data *i2s_dai_data;
> struct i2s_dai *i2s;
>
> i2s = devm_kzalloc(&pdev->dev, sizeof(struct i2s_dai), GFP_KERNEL);
> if (i2s == NULL)
> return NULL;
>
> + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
> + i2s_dai_data = of_device_get_match_data(&pdev->dev);
> + else
> + i2s_dai_data = (struct samsung_i2s_dai_data *)
> + platform_get_device_id(pdev)->driver_data;
> +
The samsung_i2s_probe() already gets the 'i2s_dai_data' instance.
It is not good to add the duplicate code in the i2s_alloc_dai().
You better to reuse the i2s_dai_data in samsung_i2s_probe()
I think that you can choose the following two method.
IMO, I prefer to use the 'method 1'.
method 1. Redefine the 'i2s_alloc_dai' function as following:
static struct i2s_dai *i2s_alloc_dai(struct platform_device *pdev, bool sec
struct samsung_i2s_dai_data *i2s_dai_data)
method 2. Add the 'i2s_dai_data' field to the 'struct i2s_dai'.
@@ -98,6 +98,8 @@ struct i2s_dai {
/* Below fields are only valid if this is the primary FIFO */
struct clk *clk_table[3];
struct clk_onecell_data clk_data;
+
+ struct samsung_i2s_dai_data *i2s_dai_data;
};
> i2s->pdev = pdev;
> i2s->pri_dai = NULL;
> i2s->sec_dai = NULL;
> @@ -1101,13 +1107,13 @@ static struct i2s_dai *i2s_alloc_dai(struct platform_device *pdev, bool sec)
> i2s->i2s_dai_drv.resume = i2s_resume;
> i2s->i2s_dai_drv.playback.channels_min = 1;
> i2s->i2s_dai_drv.playback.channels_max = 2;
> - i2s->i2s_dai_drv.playback.rates = SAMSUNG_I2S_RATES;
> + i2s->i2s_dai_drv.playback.rates = i2s_dai_data->rates;
> i2s->i2s_dai_drv.playback.formats = SAMSUNG_I2S_FMTS;
>
> if (!sec) {
> i2s->i2s_dai_drv.capture.channels_min = 1;
> i2s->i2s_dai_drv.capture.channels_max = 2;
> - i2s->i2s_dai_drv.capture.rates = SAMSUNG_I2S_RATES;
> + i2s->i2s_dai_drv.capture.rates = i2s_dai_data->rates;
> i2s->i2s_dai_drv.capture.formats = SAMSUNG_I2S_FMTS;
> }
> return i2s;
> @@ -1452,29 +1458,34 @@ static const struct samsung_i2s_variant_regs i2sv5_i2s1_regs = {
>
> static const struct samsung_i2s_dai_data i2sv3_dai_type = {
> .quirks = QUIRK_NO_MUXPSR,
> + .rates = SNDRV_PCM_RATE_8000_96000,
> .i2s_variant_regs = &i2sv3_regs,
> };
>
> static const struct samsung_i2s_dai_data i2sv5_dai_type = {
> .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR |
> QUIRK_SUPPORTS_IDMA,
> + .rates = SNDRV_PCM_RATE_8000_96000,
> .i2s_variant_regs = &i2sv3_regs,
> };
>
> static const struct samsung_i2s_dai_data i2sv6_dai_type = {
> .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR |
> QUIRK_SUPPORTS_TDM | QUIRK_SUPPORTS_IDMA,
> + .rates = SNDRV_PCM_RATE_8000_96000,
> .i2s_variant_regs = &i2sv6_regs,
> };
>
> static const struct samsung_i2s_dai_data i2sv7_dai_type = {
> .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR |
> QUIRK_SUPPORTS_TDM,
> + .rates = SNDRV_PCM_RATE_8000_192000,
> .i2s_variant_regs = &i2sv7_regs,
> };
>
> static const struct samsung_i2s_dai_data i2sv5_dai_type_i2s1 = {
> .quirks = QUIRK_PRI_6CHAN | QUIRK_NEED_RSTCLR,
> + .rates = SNDRV_PCM_RATE_8000_96000,
> .i2s_variant_regs = &i2sv5_i2s1_regs,
> };
>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
