If the dma_buffer_size is not defined in topology, fix it to 2ms default
value to make backward compatible.
Fixes: f6e6ab1d16ec ("ASoC: Intel: Skylake: Fix dma buffer size calculation")
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@xxxxxxxxx>
---
sound/soc/intel/skylake/skl-messages.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c
index eca85827dbd2..fb2f1f603f3c 100644
--- a/sound/soc/intel/skylake/skl-messages.c
+++ b/sound/soc/intel/skylake/skl-messages.c
@@ -540,6 +540,14 @@ static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx,
cpr_mconfig->gtw_cfg.dma_buffer_size =
mconfig->dma_buffer_size * dma_io_buf;
+ /* fallback to 2ms default value */
+ if (!cpr_mconfig->gtw_cfg.dma_buffer_size) {
+ if (mconfig->hw_conn_type == SKL_CONN_SOURCE)
+ cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->obs;
+ else
+ cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->ibs;
+ }
+
cpr_mconfig->cpr_feature_mask = 0;
cpr_mconfig->gtw_cfg.config_length = 0;
--
1.9.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
