On Wed, May 24, 2017 at 06:05:58PM +0800, Icenowy Zheng wrote: > Allwinner V3s features a audio codec with dedicated digital and analog parts, > like the ones on A23/H3, but much simpler (lack of MIC2, LINE IN and MBIAS). > > Add support for it. > > In order to make the codec usable, DMA support is also added in this series. > > Patch 1 split out MBIAS in analog codec driver. > > Patch 2 prepared a set of objects that have MIC2 and LINEIN stripped out > for V3s. > > Patch 3/4 adds support for V3s in analog/digital codec. > > Patch 5 add the gate bit as a common quirk of sun6i-dma driver, as V3s also > needs it. > > Patch 6 really adds support for V3s in DMA engine. > > Patch 7/8/9 adds three parts of device tree: DMA engine, codec support > and enable the codec for Lichee Pi Zero dock. > > Icenowy Zheng (9): > ASoC: sun8i-codec-analog: split out mbias > ASoC: sun8i-codec-analog: prepare a mixer control/widget/route set for > V3s > ASoC: sun8i-codec-analog: add support for V3s SoC > ASoC: sun4i-codec: Add support for V3s codec > dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk > dmaengine: sun6i: support V3s SoC variant > ARM: dts: sun8i: add DMA engine in V3s DTSI > ARM: dts: sun8i: add audio codec support into V3s DTSI > ARM: sun8i: v3s: enable audio on Lichee Pi Zero Dock board And why do we need the cross tree submission?? I have asked before and was met with silence! [1] Can you please split it up per subsystem to make it easy for everyone and clearly spell out dependencies. [1]: https://www.spinics.net/lists/dmaengine/msg12884.html -- ~Vinod _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
