On 23.05.2017 23:16, James Cameron wrote:
On Tue, May 23, 2017 at 11:09:31AM +0200, Julian Scheel wrote:This adds a driver for the TI PCM9211 digital audio interfaces transceiver. The driver currently only handles the receiver aspect of the chip and supports only control of the primary I2S (MAIN) output port. Support for AUX output is trivial to add, but wasn't done due to missing hardware for testing. The same goes for the transmitter functionality. The driver uses some extra device-tree fields to allow configuration of pin functions directly out of this driver. Signed-off-by: Julian Scheel <julian@xxxxxxxx> --- .../devicetree/bindings/sound/pcm9211.txt | 118 ++ MAINTAINERS | 6 + include/dt-bindings/sound/pcm9211.h | 55 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/pcm9211-i2c.c | 65 + sound/soc/codecs/pcm9211.c | 1357 ++++++++++++++++++++ sound/soc/codecs/pcm9211.h | 206 +++ 8 files changed, 1821 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/pcm9211.txt create mode 100644 include/dt-bindings/sound/pcm9211.h create mode 100644 sound/soc/codecs/pcm9211-i2c.c create mode 100644 sound/soc/codecs/pcm9211.c create mode 100644 sound/soc/codecs/pcm9211.h [...] diff --git a/sound/soc/codecs/pcm9211.c b/sound/soc/codecs/pcm9211.c new file mode 100644 index 000000000000..0ab4ad551df8 --- /dev/null +++ b/sound/soc/codecs/pcm9211.c @@ -0,0 +1,1357 @@ [...] +int pcm9211_probe(struct device *dev, struct regmap *regmap) +{ [...] + priv->int0 = devm_gpiod_get_optional(dev, "int0", GPIOD_IN); + if (IS_ERR(priv->reset)) { + ret = PTR_ERR(priv->reset); + dev_err(dev, "Failed to get reset gpio: %d\n", ret); + return ret; + }In above block; reset should be int0, three lines affected.
Thanks, fixed for v2. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
