Rewrite the complex ifdef condition with IS_REACHABLE().
The ifdef in opl4_local.h was without defined(MODLE) check, but this
is likely the oversight. Use IS_REACHABLE() here as well.
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
---
sound/drivers/opl4/opl4_lib.c | 4 ++--
sound/drivers/opl4/opl4_local.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/drivers/opl4/opl4_lib.c b/sound/drivers/opl4/opl4_lib.c
index 89c7aa04b3bc..240656e54400 100644
--- a/sound/drivers/opl4/opl4_lib.c
+++ b/sound/drivers/opl4/opl4_lib.c
@@ -153,7 +153,7 @@ static int snd_opl4_detect(struct snd_opl4 *opl4)
return 0;
}
-#if defined(CONFIG_SND_SEQUENCER) || (defined(MODULE) && defined(CONFIG_SND_SEQUENCER_MODULE))
+#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
static void snd_opl4_seq_dev_free(struct snd_seq_device *seq_dev)
{
struct snd_opl4 *opl4 = seq_dev->private_data;
@@ -249,7 +249,7 @@ int snd_opl4_create(struct snd_card *card,
snd_opl4_create_mixer(opl4);
snd_opl4_create_proc(opl4);
-#if defined(CONFIG_SND_SEQUENCER) || (defined(MODULE) && defined(CONFIG_SND_SEQUENCER_MODULE))
+#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
opl4->seq_client = -1;
if (opl4->hardware < OPL3_HW_OPL4_ML)
snd_opl4_create_seq_dev(opl4, seq_device);
diff --git a/sound/drivers/opl4/opl4_local.h b/sound/drivers/opl4/opl4_local.h
index 9a41bdebce6b..d5bac93f8245 100644
--- a/sound/drivers/opl4/opl4_local.h
+++ b/sound/drivers/opl4/opl4_local.h
@@ -184,7 +184,7 @@ struct snd_opl4 {
#endif
struct mutex access_mutex;
-#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
+#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
int used;
int seq_dev_num;
--
2.12.2
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
