Add new machine driver, tested with Weibu F3C MiniPC.
Based heavily on code provided by David Yang @ Everest, and other
machine drivers in the same directory.
Signed-off-by: Daniel Drake <drake@xxxxxxxxxxxx>
---
sound/soc/intel/Kconfig | 12 ++
sound/soc/intel/atom/sst/sst_acpi.c | 2 +
sound/soc/intel/boards/Makefile | 2 +
sound/soc/intel/boards/bytcht_es8316.c | 338 +++++++++++++++++++++++++++++++++
4 files changed, 354 insertions(+)
create mode 100644 sound/soc/intel/boards/bytcht_es8316.c
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 67968ef3bbda..013f056c6c12 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -214,6 +214,18 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
platforms with DA7212/7213 audio codec.
If unsure select "N".
+config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
+ tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec"
+ depends on X86_INTEL_LPSS && I2C && ACPI
+ select SND_SOC_ES8316
+ select SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_ACPI
+ select SND_SOC_INTEL_SST_MATCH if ACPI
+ help
+ This adds support for ASoC machine driver for Intel(R) Baytrail &
+ Cherrytrail platforms with ES8316 audio codec.
+ If unsure select "N".
+
config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
depends on X86_INTEL_LPSS && I2C && ACPI
diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c
index dd250b8b26f2..e0b7346cbb16 100644
--- a/sound/soc/intel/atom/sst/sst_acpi.c
+++ b/sound/soc/intel/atom/sst/sst_acpi.c
@@ -533,6 +533,8 @@ static struct sst_acpi_mach sst_acpi_chv[] = {
&chv_platform_data },
{"DLGS7213", "bytcht_da7213", "intel/fw_sst_22a8.bin", "bytcht_da7213", NULL,
&chv_platform_data },
+ {"ESSX8316", "bytcht_es8316", "intel/fw_sst_22a8.bin", "cht-bsw", NULL,
+ &chv_platform_data },
/* some CHT-T platforms rely on RT5640, use Baytrail machine driver */
{"10EC5640", "bytcr_rt5640", "intel/fw_sst_22a8.bin", "bytcr_rt5640", cht_quirk,
&chv_platform_data },
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index 56896e09445d..0cca726d249b 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -11,6 +11,7 @@ snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o
snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o
snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o
+snd-soc-sst-byt-cht-es8316-objs := bytcht_es8316.o
snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o
snd-soc-skl_rt286-objs := skl_rt286.o
snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o
@@ -29,6 +30,7 @@ obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o
obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o
+obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH) += snd-soc-sst-byt-cht-es8316.o
obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) += snd-soc-sst-byt-cht-nocodec.o
obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o
obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max98357a.o
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
new file mode 100644
index 000000000000..5e94e0befa34
--- /dev/null
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -0,0 +1,338 @@
+/*
+ * bytbyt_cht_es8316.c - ASoc Machine driver for Intel Baytrail/Cherrytrail
+ * platforms with Everest ES8316 SoC
+ *
+ * Copyright (C) 2017 Endless Mobile, Inc.
+ * Authors: David Yang <yangxiaohua@xxxxxxxxxxxxxxxx>,
+ * Daniel Drake <drake@xxxxxxxxxxxx>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <asm/platform_sst_audio.h>
+#include <linux/clk.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include "../atom/sst-atom-controls.h"
+#include "../common/sst-acpi.h"
+#include "../common/sst-dsp.h"
+
+struct byt_cht_es8316_private {
+ struct clk *mclk;
+};
+
+#define CODEC_DAI1 "ES8316 HiFi"
+
+static inline struct snd_soc_dai *get_codec_dai(struct snd_soc_card *card)
+{
+ struct snd_soc_pcm_runtime *rtd;
+
+ list_for_each_entry(rtd, &card->rtd_list, list) {
+ if (!strncmp(rtd->codec_dai->name, CODEC_DAI1,
+ strlen(CODEC_DAI1)))
+ return rtd->codec_dai;
+ }
+ return NULL;
+}
+
+static int platform_clock_control(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ struct snd_soc_dapm_context *dapm = w->dapm;
+ struct snd_soc_card *card = dapm->card;
+ struct snd_soc_dai *codec_dai = get_codec_dai(card);
+ struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
+
+ if (!codec_dai) {
+ dev_err(card->dev,
+ "Codec dai not found; Unable to set platform clock\n");
+ return -EIO;
+ }
+
+ if (SND_SOC_DAPM_EVENT_ON(event)) {
+ int ret = clk_prepare_enable(priv->mclk);
+
+ if (ret < 0) {
+ dev_err(card->dev,
+ "could not configure MCLK state");
+ return ret;
+ }
+ } else {
+ clk_disable_unprepare(priv->mclk);
+ }
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_MIC("Microphone 1", NULL),
+ SND_SOC_DAPM_MIC("Microphone 2", NULL),
+ SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
+ platform_clock_control, SND_SOC_DAPM_PRE_PMU |
+ SND_SOC_DAPM_POST_PMD),
+};
+
+static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = {
+ {"MIC1", NULL, "Microphone 1"},
+ {"MIC2", NULL, "Microphone 2"},
+
+ {"Headphone", NULL, "HPOL"},
+ {"Headphone", NULL, "HPOR"},
+
+ {"Playback", NULL, "ssp2 Tx"},
+ {"ssp2 Tx", NULL, "codec_out0"},
+ {"ssp2 Tx", NULL, "codec_out1"},
+ {"codec_in0", NULL, "ssp2 Rx" },
+ {"codec_in1", NULL, "ssp2 Rx" },
+ {"ssp2 Rx", NULL, "Capture"},
+
+ {"Headphone", NULL, "Platform Clock"},
+ {"Microphone 1", NULL, "Platform Clock"},
+ {"Microphone 2", NULL, "Platform Clock"},
+};
+
+static const struct snd_kcontrol_new byt_cht_es8316_controls[] = {
+ SOC_DAPM_PIN_SWITCH("Headphone"),
+ SOC_DAPM_PIN_SWITCH("Microphone 1"),
+ SOC_DAPM_PIN_SWITCH("Microphone 2"),
+};
+
+static int byt_cht_es8316_aif1_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ int ret;
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 19200000, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ dev_err(rtd->dev, "can't set codec clock %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime)
+{
+ struct snd_soc_card *card = runtime->card;
+ struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
+ int ret;
+
+ card->dapm.idle_bias_off = true;
+
+ /*
+ * The firmware might enable the clock at boot (this information
+ * may or may not be reflected in the enable clock register).
+ * To change the rate we must disable the clock first to cover these
+ * cases. Due to common clock framework restrictions that do not allow
+ * to disable a clock that has not been enabled, we need to enable
+ * the clock first.
+ */
+ ret = clk_prepare_enable(priv->mclk);
+ if (!ret)
+ clk_disable_unprepare(priv->mclk);
+
+ ret = clk_set_rate(priv->mclk, 19200000);
+ if (ret)
+ dev_err(card->dev, "unable to set MCLK rate\n");
+
+ return 0;
+}
+
+static const struct snd_soc_pcm_stream byt_cht_es8316_dai_params = {
+ .formats = SNDRV_PCM_FMTBIT_S24_LE,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+};
+
+static int byt_cht_es8316_codec_fixup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_interval *rate = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_RATE);
+ struct snd_interval *channels = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+ int ret;
+
+ /* The DSP will covert the FE rate to 48k, stereo */
+ rate->min = rate->max = 48000;
+ channels->min = channels->max = 2;
+
+ /* set SSP2 to 24-bit */
+ params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+
+ /*
+ * Default mode for SSP configuration is TDM 4 slot, override config
+ * with explicit setting to I2S 2ch 24-bit. The word length is set with
+ * dai_set_tdm_slot() since there is no other API exposed
+ */
+ ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS
+ );
+ if (ret < 0) {
+ dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+ if (ret < 0) {
+ dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int byt_cht_es8316_aif1_startup(struct snd_pcm_substream *substream)
+{
+ return snd_pcm_hw_constraint_single(substream->runtime,
+ SNDRV_PCM_HW_PARAM_RATE, 48000);
+}
+
+static const struct snd_soc_ops byt_cht_es8316_aif1_ops = {
+ .startup = byt_cht_es8316_aif1_startup,
+};
+
+static const struct snd_soc_ops byt_cht_es8316_be_ssp2_ops = {
+ .hw_params = byt_cht_es8316_aif1_hw_params,
+};
+
+static struct snd_soc_dai_link byt_cht_es8316_dais[] = {
+ [MERR_DPCM_AUDIO] = {
+ .name = "Audio Port",
+ .stream_name = "Audio",
+ .cpu_dai_name = "media-cpu-dai",
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ .platform_name = "sst-mfld-platform",
+ .nonatomic = true,
+ .dynamic = 1,
+ .dpcm_playback = 1,
+ .dpcm_capture = 1,
+ .ops = &byt_cht_es8316_aif1_ops,
+ },
+
+ [MERR_DPCM_DEEP_BUFFER] = {
+ .name = "Deep-Buffer Audio Port",
+ .stream_name = "Deep-Buffer Audio",
+ .cpu_dai_name = "deepbuffer-cpu-dai",
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ .platform_name = "sst-mfld-platform",
+ .nonatomic = true,
+ .dynamic = 1,
+ .dpcm_playback = 1,
+ .ops = &byt_cht_es8316_aif1_ops,
+ },
+
+ [MERR_DPCM_COMPR] = {
+ .name = "Compressed Port",
+ .stream_name = "Compress",
+ .cpu_dai_name = "compress-cpu-dai",
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ .platform_name = "sst-mfld-platform",
+ },
+
+ /* back ends */
+ {
+ .name = "SSP2-Codec",
+ .id = 1,
+ .cpu_dai_name = "ssp2-port",
+ .platform_name = "sst-mfld-platform",
+ .no_pcm = 1,
+ .codec_dai_name = "ES8316 HiFi",
+ .codec_name = "i2c-ESSX8316:00",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBS_CFS,
+ .be_hw_params_fixup = byt_cht_es8316_codec_fixup,
+ .nonatomic = true,
+ .dpcm_playback = 1,
+ .dpcm_capture = 1,
+ .init = byt_cht_es8316_init,
+ .ops = &byt_cht_es8316_be_ssp2_ops,
+ },
+};
+
+
+/* SoC card */
+static struct snd_soc_card byt_cht_es8316_card = {
+ .name = "bytcht-es8316",
+ .owner = THIS_MODULE,
+ .dai_link = byt_cht_es8316_dais,
+ .num_links = ARRAY_SIZE(byt_cht_es8316_dais),
+ .dapm_widgets = byt_cht_es8316_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(byt_cht_es8316_widgets),
+ .dapm_routes = byt_cht_es8316_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(byt_cht_es8316_audio_map),
+ .controls = byt_cht_es8316_controls,
+ .num_controls = ARRAY_SIZE(byt_cht_es8316_controls),
+ .fully_routed = true,
+};
+
+static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct byt_cht_es8316_private *priv;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC);
+ if (!priv)
+ return -ENOMEM;
+
+ /* register the soc card */
+ byt_cht_es8316_card.dev = &pdev->dev;
+ snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv);
+
+ priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+ if (IS_ERR(priv->mclk)) {
+ ret = PTR_ERR(priv->mclk);
+ dev_err(&pdev->dev,
+ "Failed to get MCLK from pmc_plt_clk_3: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = devm_snd_soc_register_card(&pdev->dev, &byt_cht_es8316_card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret);
+ return ret;
+ }
+ platform_set_drvdata(pdev, &byt_cht_es8316_card);
+ return ret;
+}
+
+static struct platform_driver snd_byt_cht_es8316_mc_driver = {
+ .driver = {
+ .name = "bytcht_es8316",
+ },
+ .probe = snd_byt_cht_es8316_mc_probe,
+};
+
+module_platform_driver(snd_byt_cht_es8316_mc_driver);
+MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail Machine driver");
+MODULE_AUTHOR("David Yang <yangxiaohua@xxxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bytcht_es8316");
--
2.11.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
