hdac_wait_for_cmd_dmas() uses a jiffie timeout to ensure that we do not
wait forever for stuck hardware. However, it is called from an
irq-disabled context which prevents jiffie from advancing and so the
loop doesn't terminate if the hardware fails. This can then cause NMI
watchdog warnings, such as:
NMI watchdog: Watchdog detected hard LOCKUP on cpu 3
Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core snd_pcm ptp mei_me prime_numbers pps_core mei lpc_ich i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915]
irq event stamp: 13366
hardirqs last enabled at (13365): [<ffffffff81891a87>] _raw_spin_unlock_irq+0x27/0x50
hardirqs last disabled at (13366): [<ffffffff818918d2>] _raw_spin_lock_irq+0x12/0x50
softirqs last enabled at (12744): [<ffffffff81085c79>] __do_softirq+0x1d9/0x4c0
softirqs last disabled at (12721): [<ffffffff810860d9>] irq_exit+0xa9/0xc0
CPU: 3 PID: 10443 Comm: kworker/u8:11 Tainted: G U 4.11.0-rc4-CI-CI_DRM_319+ #1
Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017
Workqueue: events_unbound async_run_entry_fn
task: ffff88024cd32740 task.stack: ffffc9000162c000
RIP: 0010:preempt_count_add+0xe/0xc0
RSP: 0018:ffffc9000162fbd8 EFLAGS: 00000082
RAX: 0000000080000001 RBX: 0000000704b96558 RCX: 0000000000000002
RDX: 0000000000000000 RSI: ffffffff81c74f2d RDI: 0000000000000001
RBP: ffffc9000162fc08 R08: 00000000bbcc90cc R09: 23c7b07100000000
R10: ffffffff827901a8 R11: ffff88024cd32740 R12: 0000000704b92baa
R13: 0000000000003ea0 R14: 0000000000000003 R15: ffffffffa00061f0
FS: 0000000000000000(0000) GS:ffff880256d80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f90f84a5144 CR3: 0000000003e0f000 CR4: 00000000003406e0
Call Trace:
? delay_tsc+0x3d/0xc0
__delay+0xa/0x10
__const_udelay+0x31/0x40
snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core]
? azx_dev_disconnect+0x20/0x20 [snd_hda_intel]
snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core]
azx_stop_chip+0x9/0x10 [snd_hda_codec]
azx_suspend+0x72/0x220 [snd_hda_intel]
pci_pm_suspend+0x71/0x140
dpm_run_callback+0x6f/0x330
? pci_pm_freeze+0xe0/0xe0
__device_suspend+0xf9/0x370
? dpm_watchdog_set+0x60/0x60
async_suspend+0x1a/0x90
async_run_entry_fn+0x34/0x160
process_one_work+0x1f4/0x6d0
? process_one_work+0x16e/0x6d0
worker_thread+0x49/0x4a0
kthread+0x107/0x140
? process_one_work+0x6d0/0x6d0
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x2e/0x40
Fixes: 38b19ed7f81e ("ALSA: hda: fix to wait for RIRB & CORB DMA to set")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Cc: Jeeja KP <jeeja.kp@xxxxxxxxx>
Cc: Vinod Koul <vinod.koul@xxxxxxxxx>
Cc: Takashi Iwai <tiwai@xxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # v4.7+
---
sound/hda/hdac_controller.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index ee08c389b4d6..7f8806b03982 100644
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -85,14 +85,14 @@ static void hdac_wait_for_cmd_dmas(struct hdac_bus *bus)
{
unsigned long timeout;
- timeout = jiffies + msecs_to_jiffies(100);
+ timeout = 100 * 100; /* 100ms */
while ((snd_hdac_chip_readb(bus, RIRBCTL) & AZX_RBCTL_DMA_EN)
- && time_before(jiffies, timeout))
+ && timeout--)
udelay(10);
- timeout = jiffies + msecs_to_jiffies(100);
+ timeout = 100 * 100; /* 100ms */
while ((snd_hdac_chip_readb(bus, CORBCTL) & AZX_CORBCTL_RUN)
- && time_before(jiffies, timeout))
+ && timeout--)
udelay(10);
}
--
2.11.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
