Hi there, I have recently bought a Digidesign Mbox 2 Mini and found the lack of support for 44100Hz sample rate in the driver limiting (the sample rate was hard-set to 48000Hz by the original author even though the device supports it, because he couldn't get the frame rate switching to work reliably). I had a go at hacking the driver and came up with the following patch which appears to work on the MBox 2 Mini: https://pastebin.com/kzzTDj9T I have built and tested this with Linux 4.8.15 without any realtime patches. I am planning to pick up a "full size" Mbox 2 as well, in the meantime if anyone on the list owns one I would appreciate if you could test this and let me know the result. There is a possibility that it will not work without the "magic" init sequence that I have removed because it does not look like it's needed on the Mini. Although I would be a bit surprised because the two devices are apparently identical to the point that the Mini allows the use of it's physically nonexistent features. Once someone could confirm that this works, I would like to get it merged. This is my first attempt at submitting a patch for any Linux device driver so please let me know if I need to do anything else :) Cheers, Vik -- My other sig is hilarious _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
