According to the TAS2552 datasheet the possible I2C addresses are: 0x40 - when ADDR pin is 0 0x41 - when ADDR pin is 1 List the possible values for better clarification. Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx> --- Documentation/devicetree/bindings/sound/tas2552.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/tas2552.txt b/Documentation/devicetree/bindings/sound/tas2552.txt index 54c1c87..ea8abf0 100644 --- a/Documentation/devicetree/bindings/sound/tas2552.txt +++ b/Documentation/devicetree/bindings/sound/tas2552.txt @@ -5,7 +5,8 @@ The tas2552 serial control bus communicates through I2C protocols Required properties: - compatible - One of: "ti,tas2552" - TAS2552 - - reg - I2C slave address + - reg - I2C slave address: it can be 0x40 if ADDR pin is 0 + or 0x41 if ADDR pin is 1. - supply-*: Required supply regulators are: "vbat" battery voltage "iovdd" I/O Voltage -- 2.7.4 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
