From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
R-Car Datasheet is indicating "SSICR.CKDV = 000 is invalid when
SSIWSR.WS_MODE = 1 or SSIWSR.CONT = 1".
Current driver will set CONT, thus, we shouldn't use CKDV = 000.
This patch fixup it.
Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@xxxxxxxxxxx>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@xxxxxxxxxxx>
---
sound/soc/sh/rcar/ssi.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 9594d44..d0602c1 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -245,6 +245,15 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod,
for (j = 0; j < ARRAY_SIZE(ssi_clk_mul_table); j++) {
/*
+ * It will set SSIWSR.CONT here, but SSICR.CKDV = 000
+ * with it is not allowed. (SSIWSR.WS_MODE with
+ * SSICR.CKDV = 000 is not allowed either).
+ * Skip it. See SSICR.CKDV
+ */
+ if (j == 0)
+ continue;
+
+ /*
* this driver is assuming that
* system word is 32bit x chan
* see rsnd_ssi_init()
--
1.9.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
