This was reported by checkpatch.pl Signed-off-by: Codrut Grosu <codrut.cristian.grosu@xxxxxxxxx> --- sound/soc/pxa/hx4700.c | 3 ++- sound/soc/pxa/pxa-ssp.c | 3 ++- sound/soc/pxa/pxa2xx-pcm.c | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/sound/soc/pxa/hx4700.c b/sound/soc/pxa/hx4700.c index 8548304..17c2e67 100644 --- a/sound/soc/pxa/hx4700.c +++ b/sound/soc/pxa/hx4700.c @@ -70,7 +70,8 @@ static int hx4700_hw_params(struct snd_pcm_substream *substream, return ret; /* inform codec driver about clock freq * - * (PXA I2S always uses divider 256) */ + * (PXA I2S always uses divider 256) + */ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 256 * params_rate(params), SND_SOC_CLOCK_IN); if (ret < 0) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 3cad990..3bdace6 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -254,7 +254,8 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, } /* The SSP clock must be disabled when changing SSP clock mode - * on PXA2xx. On PXA3xx it must be enabled when doing so. */ + * on PXA2xx. On PXA3xx it must be enabled when doing so. + */ if (ssp->type != PXA3xx_SSP) clk_disable_unprepare(ssp->clk); val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0; diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c index b51d7a0..3926cd8 100644 --- a/sound/soc/pxa/pxa2xx-pcm.c +++ b/sound/soc/pxa/pxa2xx-pcm.c @@ -31,7 +31,8 @@ static int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, dma = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); /* return if this is a bufferless transfer e.g. - * codec <--> BT codec or GSM modem -- lg FIXME */ + * codec <--> BT codec or GSM modem -- lg + */ if (!dma) return 0; -- 1.9.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
