Hello Mark Brown,
Thank you to have applied my patches!
On 02/02/2017 10:24, Mylène Josserand wrote:
Add a new compatible for sun4i-i2s driver to handle some
SoCs that have a reset line that must be asserted/deasserted.
This new compatible, "allwinner,sun6i-a31-i2s", requires the
property "resets" which should be a phandle to the reset line.
Except these differences, the compatible is identical to previous one
which will not handle a reset line.
Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx>
Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
Documentation/devicetree/bindings/sound/sun4i-i2s.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index 7b526ec64991..f4adc58f82ba 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -7,6 +7,7 @@ Required properties:
- compatible: should be one of the followings
- "allwinner,sun4i-a10-i2s"
+ - "allwinner,sun6i-a31-i2s"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: should contain the I2S interrupt.
@@ -19,6 +20,10 @@ Required properties:
- "mod" : module clock for the I2S controller
- #sound-dai-cells : Must be equal to 0
+Required properties for the following compatibles:
+ - "allwinner,sun6i-a31-i2s"
+- resets: phandle to the reset line for this codec
+
Example:
i2s0: i2s@01c22400 {
For all my series, you did not pick-up this patch. I was wondering if
you have any comment on it? Is there something wrong?
Thank you in advance,
Best regards,
--
Mylène Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
