From: Daniel Girnus <dgirnus@xxxxxxxxxxxxxx>
Some of userland applications call 'snd_pcm_hw_params()' and
'snd_pcm_hw_prepare()' sequentially, which means 'snd_pcm_hw_prepare()'
is called twice and the second 'snd_pcm_hw_prepare()' is called in
'SNDRV_PCM_STATE_PREPARED' state.
Some devices are not able to manage this and they will stop playback
if the sample rate will be configured several times over USB protocol.
V2: updated Changelog
Signed-off-by: Daniel Girnus <dgirnus@xxxxxxxxxxxxxx>
Signed-off-by: Jens Lorenz <jlorenz@xxxxxxxxxxxxxx>
Signed-off-by: Jiada Wang <jiada_wang@xxxxxxxxxx>
---
sound/usb/pcm.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 44d178e..a522c9a 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -806,17 +806,18 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
if (ret < 0)
goto unlock;
- iface = usb_ifnum_to_if(subs->dev, subs->cur_audiofmt->iface);
- alts = &iface->altsetting[subs->cur_audiofmt->altset_idx];
- ret = snd_usb_init_sample_rate(subs->stream->chip,
- subs->cur_audiofmt->iface,
- alts,
- subs->cur_audiofmt,
- subs->cur_rate);
- if (ret < 0)
- goto unlock;
-
if (subs->need_setup_ep) {
+
+ iface = usb_ifnum_to_if(subs->dev, subs->cur_audiofmt->iface);
+ alts = &iface->altsetting[subs->cur_audiofmt->altset_idx];
+ ret = snd_usb_init_sample_rate(subs->stream->chip,
+ subs->cur_audiofmt->iface,
+ alts,
+ subs->cur_audiofmt,
+ subs->cur_rate);
+ if (ret < 0)
+ goto unlock;
+
ret = configure_endpoint(subs);
if (ret < 0)
goto unlock;
--
2.9.3
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
