@Takashi, can you confirm if the possible values we can set are the same the hdajackretask program uses on overrides? On 14 November 2016 at 22:21, Paulo Fidalgo <paulo.fidalgo.pt@xxxxxxxxx> wrote: > Thanks Takashi for point out, but that document is overwhelming. > I understand that developing drivers for unknown hardware should be > like running in the woods with our eyes covered, but I don't feel I > have the enough knowledge and time to be able to do it. > > If helps, when I connect the headset running hda-analyzer tool in > monitor mode I only have events related to the OUTPUT: > > Watching 2 cards > ====================================== > Diff for codec 1/0 (0x10134208): > --- > +++ > @@ -7,17 +7,17 @@ > No Modem Function Group found > Default PCM: > rates [0x0]: > bits [0x0]: > formats [0x0]: > Default Amp-In caps: N/A > Default Amp-Out caps: N/A > GPIO: io=6, o=2, i=0, unsolicited=1, wake=1 > - IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0 > + IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0 > IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 > IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 > IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 > IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 > IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 > Node 0x02 [Audio Output] wcaps 0xd043d: Stereo Amp-Out Stripe > Control: name="Headphone Playback Volume", index=0, device=0 > ControlAmp: chs=3, dir=1, idx=0, ofs=0 > @@ -225,26 +225,24 @@ > Power: setting=D3, actual=D3 > Connection: 1 > 0x02 > Node 0x12 [Pin Complex] wcaps 0x400501: Stereo > Pincap 0x00000050: OUT Balance > Pin Default 0x90170011: [Fixed] Speaker at Int N/A > Conn = Analog, Color = Unknown > DefAssociation = 0x1, Sequence = 0x1 > - Pin-ctls: 0x40: OUT > Power: setting=D3, actual=D3 > Connection: 1 > 0x03 > Node 0x13 [Pin Complex] wcaps 0x400501: Stereo > Pincap 0x00000050: OUT Balance > Pin Default 0x90170012: [Fixed] Speaker at Int N/A > Conn = Analog, Color = Unknown > DefAssociation = 0x1, Sequence = 0x2 > - Pin-ctls: 0x40: OUT > Power: setting=D3, actual=D3 > Connection: 1 > 0x04 > Node 0x14 [Pin Complex] wcaps 0x400501: Stereo > Pincap 0x00000050: OUT Balance > Pin Default 0x90170014: [Fixed] Speaker at Int N/A > Conn = Analog, Color = Unknown > DefAssociation = 0x1, Sequence = 0x4 > > > Is there any other info I can provide to help? > > Kind regards, > > Paulo Fidalgo > > On 11 November 2016 at 20:34, Takashi Iwai <tiwai@xxxxxxx> wrote: >> On Thu, 10 Nov 2016 22:52:52 +0100, >> Paulo Fidalgo wrote: >>> >>> Hi, >>> >>> After reporting the issue on bugzilla >>> (https://bugzilla.kernel.org/show_bug.cgi?id=155601) I felt I could do >>> more in order to try to get a patch to fix the issue. >>> >>> Basically when I plug an headset(mic+headphone), it only detects the >>> headphone not the mic. >>> >>> Since I assumed the "memory address" of the 0x18 pin is wrong, I've >>> tried to change some values in order to get it working. >> >> The value you're referring to isn't a "memory address" at all. >> It's a "pin configuration" value, containing the information like >> the location, purpose, sequence number of the given pin, and it's >> encoded in 32bit integer. Basically it's merely a hint for drivers to >> configure the system properly. >> >> Refer to the HD-audio specification document for more details. >> >> >> Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
