On Tue, Oct 18, 2016 at 06:15:28AM +1100, Matt Flax wrote:
>
>
> On 17/10/16 21:59, Charles Keepax wrote:
> >On Mon, Oct 17, 2016 at 09:46:20PM +1100, Matt Flax wrote:
> >>
> >>On 17/10/16 21:37, Charles Keepax wrote:
> >>>On Mon, Oct 17, 2016 at 09:42:18AM +1100, Matt Flax wrote:
<snip>
> >>I didn't understand your first suggestion, can you give an example of how to
> >>do that in the startup callback ? Sounds like a good idea.
> >If you look in arizona_startup in sound/soc/codecs/arizona.c we
> >specify constraints for the sample rates based off our clocking,
> >there is an equivalent SNDRV_PCM_HW_PARAM_CHANNELS that you
> >should be able to you to specify the supported channels with.
> OK - started on this ... however I get the following problem when trying to
> set the stream name :
> [ 6.331002] wm8580 1-001a: ASoC: error - multiple DAI 1-001a registered
> with no name
>
> I think this is happening in i2c probe. I was wanting to set the stream name
> dynamically to match the codec model number.
> I was planning to do the following :
> static int wm8580_playback_startup(struct snd_pcm_substream *substream,
> struct snd_soc_dai *dai)
> {
> struct snd_soc_codec *codec = dai->codec;
> struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
>
> strncpy(substream->name, wm8580->drvdata->name_playback,
> sizeof(wm8580->drvdata->name_playback) - 1);
>
> return snd_pcm_hw_constraint_single(substream->runtime,
> SNDRV_PCM_HW_PARAM_CHANNELS, wm8580->drvdata->num_dacs * 2);
> }
>
> Do you think perhaps I should set a new name in the snd_soc_dai_driver to
> the following :
> .name = "wm858x-hifi-playback",
> .name = "wm858x-hifi-capture",
I don't think you need to bother setting the DAI name to match
the CODEC, I am happy with a generic name.
Thanks,
Charles
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
