xerofoify wrote: > Do anyone known of the best way to test this function, > ac97_fp_rec_volume_put. Seems there may be a bug in > it. What bug? > I do have the hardware so that's not a issue just wondering what > the different between fp_rec and the standard > get functions are in terms of testing. The other functions use five bits, this one uses three bits. (The AC'97 spec says the REC_GAIN register has four bits for the volume; I don't know where the difference comes from.) And the REC_GAIN register should affect all recorded signals going through the AC'97 mixer (all except line in). > Further more I am assuming this > has to do with the fp headphones switch > but I don't have headphones that are fp so is there another way to > test this particular function without checking > sound levels. You could connect any microphone to the front panel connector. Or check the AC'97 registers in /proc/asound/cardX/oxygen. Regards, Clemens _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
