From: Vedang Patel <vedang.patel@xxxxxxxxx>
There is log spam while doing playback, record or reloading the
audio firmware.
print_hex_dump uses printk(KERN_DEBUG,... which is different from
dev_dbg used elsewhere in the driver: it's always enabled at
compile-time. Change it to print_hex_dump_debug for logging consistency.
For consistency with other log statements, change dev_info to dev_dbg
for a kernel print which is frequently printed by the driver.
Signed-off-by: Vedang Patel <vedang.patel@xxxxxxxxx>
---
sound/soc/intel/skylake/skl-messages.c | 2 +-
sound/soc/intel/skylake/skl-sst-ipc.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c
index 226db84..81224de 100644
--- a/sound/soc/intel/skylake/skl-messages.c
+++ b/sound/soc/intel/skylake/skl-messages.c
@@ -730,7 +730,7 @@ static int skl_set_module_format(struct skl_sst *ctx,
dev_dbg(ctx->dev, "Module type=%d config size: %d bytes\n",
module_config->id.module_id, param_size);
- print_hex_dump(KERN_DEBUG, "Module params:", DUMP_PREFIX_OFFSET, 8, 4,
+ print_hex_dump_debug("Module params:", DUMP_PREFIX_OFFSET, 8, 4,
*param_data, param_size, false);
return 0;
}
diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c
index 5434602..c141f24 100644
--- a/sound/soc/intel/skylake/skl-sst-ipc.c
+++ b/sound/soc/intel/skylake/skl-sst-ipc.c
@@ -363,7 +363,7 @@ static void skl_ipc_process_reply(struct sst_generic_ipc *ipc,
/* first process the header */
switch (reply) {
case IPC_GLB_REPLY_SUCCESS:
- dev_info(ipc->dev, "ipc FW reply %x: success\n", header.primary);
+ dev_dbg(ipc->dev, "ipc FW reply %x: success\n", header.primary);
/* copy the rx data from the mailbox */
sst_dsp_inbox_read(ipc->dsp, msg->rx_data, msg->rx_size);
break;
@@ -692,7 +692,7 @@ int skl_ipc_init_instance(struct sst_generic_ipc *ipc,
/* param_block_size must be in dwords */
u16 param_block_size = msg->param_data_size / sizeof(u32);
- print_hex_dump(KERN_DEBUG, NULL, DUMP_PREFIX_NONE,
+ print_hex_dump_debug(NULL, DUMP_PREFIX_NONE,
16, 4, buffer, param_block_size, false);
header.primary = IPC_MSG_TARGET(IPC_MOD_MSG);
--
1.7.9.5
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
