On 13/06/16 18:37, Charles Keepax wrote:
On Sun, Jun 12, 2016 at 01:22:26PM +1000, Matt Flax wrote:
It appears that my logic here is flawed.
From what I can tell, it isn't possible to get a suitable bit clock out of
the codec when using a 12 MHz crystal. For that reason, in my hardware I
will change crystals from 12 MHz.
This looks correct the chip only has simple dividers so you won't
be able to get a good audio rate clock from a 12MHz crystal.
I just want to check ... are there any versions of this codec which output
the bit clock when in USB mode on the BCLK pin ?
Apologies I am not quite sure I follow what USB mode is in this
context, and the bit clock surely always comes out of the BCLK
pin. Do you simply mean a system with a clock speed that
relates to the 48MHz USB clock, such as your 12MHz? Basically any
part that has a PLL/FLL should work for that, for example the
wm8998:
http://www.cirrus.com/en/products/pro/detail/P1265.html
Literally, with the chip set to usb mode (register 0b0001000 bit 0, page
41 of the data sheet) it appears that the 12 MHz clock comes out of the
BCLK pin, rather then the bit clock.
Matt
Thanks,
Charles
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
