On Mon, May 23, 2016 at 04:13:57PM -0700, Nicolin Chen wrote:
> CS53L30 is a Quad-Channel ADC from Cirrus Logic with an I2S/TDM DAI.
> So this patch adds support for CS53L30 that supports 24-bit recording
> feature.
>
> Signed-off-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
> ---
> Changelog:
> v5->v6
> * Added clock controls
> * Reconstructed bitfield macros and improved coding style
> * Fixed some misuses of regmap_update_bits()
> * Added TLV volume controls to replace enums for preamplifier
> * Added micbias level in DT instead of exposing to user-space
> * Simplified SDOUTx controls by removing cs53l30_asp_sdout_event()
> (Still be able to use set_tristate() instead)
> * Removed useless header files and sort the rest alphabetically
> * Registered runtime pm functions to the driver
> * Added regulator controls (VA and VP)
> * Added writeable register function for regmap
> * Merged two ASP dais
> * Added TDM support
> * Added a simple introduction in commit log
>
> .../devicetree/bindings/sound/cs53l30.txt | 38 +
> sound/soc/codecs/Kconfig | 6 +
> sound/soc/codecs/Makefile | 2 +
> sound/soc/codecs/cs53l30.c | 1097 ++++++++++++++++++++
> sound/soc/codecs/cs53l30.h | 458 ++++++++
> 5 files changed, 1601 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/cs53l30.txt
> create mode 100644 sound/soc/codecs/cs53l30.c
> create mode 100644 sound/soc/codecs/cs53l30.h
>
> diff --git a/Documentation/devicetree/bindings/sound/cs53l30.txt b/Documentation/devicetree/bindings/sound/cs53l30.txt
> new file mode 100644
> index 0000000..ace7ffe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/cs53l30.txt
> @@ -0,0 +1,38 @@
> +CS53L30 audio CODEC
> +
> +Required properties:
> +
> + - compatible : "cirrus,cs53l30"
> +
> + - reg : the I2C address of the device
> +
> + - VA-supply, VP-supply : power supplies for the device,
> + as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
Also, these are missing from the example yet are required. I'd argue
they should be optional as you could have designs with no regulator
control.
> +
> +Optional properties:
> +
> + - reset-gpios : a GPIO spec for the reset pin.
> +
> + - micbias-lvl : Set the output voltage level on the MICBIAS Pin.
> + 0 = Hi-Z
> + 1 = 1.80 V
> + 2 = 2.75 V
> +
> + - use-sdout2 : This is a boolean property. If present, it indicates
> + the hardware design connects both SDOUT1 and SDOUT2
> + pins to output data. Otherwise, it indicates that
> + only SDOUT1 is connected for data output.
> + * CS53l30 supports 4-channel data output in the same
> + * frame using two different ways:
> + * 1) Normal I2S mode on two data pins -- each SDOUT
> + * carries 2-channel data in the same time.
> + * 2) TDM mode on one signle data pin -- SDOUT1 carries
> + * 4-channel data per frame.
> +
> +Example:
> +
> +codec: cs53l30@48 {
> + compatible = "cirrus,cs53l30";
> + reg = <0x48>;
> + reset-gpios = <&gpio 54 0>;
> +};
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
