On Tue, May 17, 2016 at 02:48:54PM +0200, Petr Kulhavy wrote:
> The WM8758 chip is almost identical to WM8985 with the difference that it
> doesn't feature the AUX input. This patch adds the WM8758 support into the
> WM8985 driver.
>
> The chip selection is done by the I2C name. The SPI probe supports only
> the WM8985.
>
> Signed-off-by: Petr Kulhavy <petr@xxxxxxxxx>
> ---
> +
> +static int wm8985_add_widgets(struct snd_soc_codec *codec)
> +{
> + struct wm8985_priv *wm8985 = snd_soc_codec_get_drvdata(codec);
> + struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
> +
> + snd_soc_dapm_new_controls(dapm, wm8985_common_dapm_widgets,
> + ARRAY_SIZE(wm8985_common_dapm_widgets));
> + snd_soc_dapm_add_routes(dapm, wm8985_common_dapm_routes,
> + ARRAY_SIZE(wm8985_common_dapm_routes));
> +
> + switch (wm8985->dev_type) {
> + case WM8758:
> + snd_soc_add_codec_controls(codec, wm8985_alc_snd_controls,
> + ARRAY_SIZE(wm8985_alc_snd_controls));
> + snd_soc_add_codec_controls(codec, wm8985_adc_snd_controls,
> + ARRAY_SIZE(wm8985_adc_snd_controls));
> + snd_soc_add_codec_controls(codec, wm8985_dac_snd_controls,
> + ARRAY_SIZE(wm8985_dac_snd_controls));
> + snd_soc_add_codec_controls(codec, wm8985_eq_snd_controls,
> + ARRAY_SIZE(wm8985_eq_snd_controls));
> + snd_soc_add_codec_controls(codec, wm8985_3d_snd_controls,
> + ARRAY_SIZE(wm8985_3d_snd_controls));
Why not just put all these in a common controls array? They seem
to all be used on 8985 as well.
> +
> + snd_soc_dapm_new_controls(dapm, wm8758_dapm_widgets,
> + ARRAY_SIZE(wm8758_dapm_widgets));
> + break;
> +
> + case WM8985:
> + snd_soc_add_codec_controls(codec, wm8985_alc_snd_controls,
> + ARRAY_SIZE(wm8985_alc_snd_controls));
> + snd_soc_add_codec_controls(codec, wm8985_adc_snd_controls,
> + ARRAY_SIZE(wm8985_adc_snd_controls));
> + snd_soc_add_codec_controls(codec, wm8985_dac_snd_controls,
> + ARRAY_SIZE(wm8985_dac_snd_controls));
> + snd_soc_add_codec_controls(codec, wm8985_aux_snd_controls,
> + ARRAY_SIZE(wm8985_aux_snd_controls));
> + snd_soc_add_codec_controls(codec, wm8985_eq_snd_controls,
> + ARRAY_SIZE(wm8985_eq_snd_controls));
> + snd_soc_add_codec_controls(codec, wm8985_3d_snd_controls,
> + ARRAY_SIZE(wm8985_3d_snd_controls));
> + snd_soc_add_codec_controls(codec, wm8985_spkr_snd_controls,
> + ARRAY_SIZE(wm8985_spkr_snd_controls));
And why not put aux and spkr in a wm8985 array? Then you only
need two arrays.
> +
> + snd_soc_dapm_new_controls(dapm, wm8985_dapm_widgets,
> + ARRAY_SIZE(wm8985_dapm_widgets));
> + snd_soc_dapm_add_routes(dapm, wm8985_aux_dapm_routes,
> + ARRAY_SIZE(wm8985_aux_dapm_routes));
> + break;
> + }
> +
> + return 0;
> +}
>
> static int eqmode_get(struct snd_kcontrol *kcontrol,
> struct snd_ctl_elem_value *ucontrol)
> @@ -1005,6 +1120,8 @@ static int wm8985_probe(struct snd_soc_codec *codec)
> snd_soc_update_bits(codec, WM8985_BIAS_CTRL, WM8985_BIASCUT,
> WM8985_BIASCUT);
>
> + wm8985_add_widgets(codec);
> +
> return 0;
>
> err_reg_enable:
> @@ -1047,13 +1164,6 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8985 = {
> .probe = wm8985_probe,
> .set_bias_level = wm8985_set_bias_level,
> .suspend_bias_off = true,
> -
> - .controls = wm8985_snd_controls,
> - .num_controls = ARRAY_SIZE(wm8985_snd_controls),
> - .dapm_widgets = wm8985_dapm_widgets,
> - .num_dapm_widgets = ARRAY_SIZE(wm8985_dapm_widgets),
> - .dapm_routes = wm8985_dapm_routes,
> - .num_dapm_routes = ARRAY_SIZE(wm8985_dapm_routes),
I think you should still be able to use these for the common
functionality.
Thanks,
Charles
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
