Am Montag, 9. Mai 2016, 12:46:34 schrieb Enric Balletbo i Serra: > Set i2s block to "okay", add sound node for max98090 with gpios for > HP and Mic detect and pinctrl, and add a max98090 device and ts3a227e to > the correct i2c bus. > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> I only got a "applied" reply from Marks scripts for patch 3/5, so only today saw that all 3 actually got applied. Anyway, I've applied this to my dts32-branch for 4.8 now [0] with some modifications regarding - the commit subject+message - ordering - io_domains access (via the phandle now) - regulator suspend property so maybe take a look and holler if you see a mistake. I was able to get audio over the headphones (so definitly an improvement), but so far not over the built-in speakers. Did you need to do something special in the configuration for this? Heiko [0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?h=volatile-v4.8-armsoc/dts32&id=1452aee5a7acc03518ef5215dd3dbac4444efe52 > --- > Changes since v1: > - None > > arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi | 102 > ++++++++++++++++++++++ 1 file changed, 102 insertions(+) > create mode 100644 arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi > > diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi > b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi new file mode 100644 > index 0000000..f045e1a > --- /dev/null > +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi > @@ -0,0 +1,102 @@ > +/* > + * Google Veyron (and derivatives) fragment for the max98090 audio > + * codec and analog headphone jack. > + * > + * Copyright 2016 Google, Inc > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/ { > + > + sound { > + compatible = "rockchip,rockchip-audio-max98090"; > + rockchip,model = "ROCKCHIP-I2S"; > + rockchip,i2s-controller = <&i2s>; > + rockchip,audio-codec = <&max98090>; > + rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; > + rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; > + rockchip,headset-codec = <&headsetcodec>; > + pinctrl-names = "default"; > + pinctrl-0 = <&mic_det>, <&hp_det>; > + }; > + > + io-domains { > + audio-supply = <&vcc18_codec>; > + }; > +}; > + > +&rk808 { > + vcc10-supply = <&vcc33_sys>; > + > + regulators { > + vcc18_codec: LDO_REG6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc18_codec"; > + regulator-suspend-mem-disabled; > + }; > + }; > +}; > + > +&i2c2 { > + max98090: max98090@10 { > + compatible = "maxim,max98090"; > + reg = <0x10>; > + clock-names = "mclk"; > + clocks = <&cru SCLK_I2S0_OUT>; > + interrupt-parent = <&gpio6>; > + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; > + pinctrl-names = "default"; > + pinctrl-0 = <&int_codec>; > + }; > +}; > + > +&i2c4 { > + headsetcodec: ts3a227e@3b { > + compatible = "ti,ts3a227e"; > + reg = <0x3b>; > + interrupt-parent = <&gpio0>; > + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ts3a227e_int_l>; > + ti,micbias = <7>; /* MICBIAS = 2.8V */ > + }; > +}; > + > +&i2s { > + status = "okay"; > + clock-names = "i2s_hclk", "i2s_clk"; > + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; > +}; > + > +&pinctrl { > + codec { > + hp_det: hp-det { > + rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + /* > + * HACK: We're going to _pull down_ this _active low_ interrupt > + * so that it never fires. We don't need this interrupt because > + * we've got a ts3a227e chip but the driver requires it. > + */ > + int_codec: int-codec { > + rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + mic_det: mic-det { > + rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + headset { > + ts3a227e_int_l: ts3a227e-int-l { > + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > +}; _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel