On Mon, May 09, 2016 at 04:35:19PM +0200, Petr Kulhavy wrote:
> Add devicetree binding for the TI DA850/OMAP-L138/AM18xx
> MultiChannel Buffered Serial Port (McBSP)
>
> The optional register range "dat" is not implemented at the moment.
> The current driver supports only DMA into RX/TX registers but no FIFO.
> Once the FIFO is implemented in the driver the "dat" range will be used.
>
> Signed-off-by: Petr Kulhavy <petr@xxxxxxxxx>
> ---
> v1: initial
> v2: add missing TC channel in dmas properties (for compatibility with the new EDMA3 binding)
> remove "-audio" postfix from the compatible string
> remove "channel-combine" property
> v3: remove the index note from the "mpu" property.
> specify exactly the supported platforms in compatible string
> v4: minor correction in the example ("interrupt names"), re-added index note to the "mpu" property.
> v5: example updated to match da850.dtsi: using "sound@" and removed leading zeros from the reg property
>
> .../devicetree/bindings/sound/davinci-mcbsp.txt | 52 ++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
Acked-by: Rob Herring <robh@xxxxxxxxxx>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
