On Wed, May 04, 2016 at 06:42:52PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <fabio.estevam@xxxxxxx> > > On mx6ul the General Purpose Register 1 (GPR1) contains the following > bits for configuring the direction of the SAI MCLKs: > SAI1_MCLK_DIR, SAI2_MCLK_DIR, SAI3_MCLK_DIR > > Introduce the "fsl,sai-mclk-direction-output" optional property to allow > configuring the SAI_MCLK outputs. > > Tested on a imx6ul-evk board. > > Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx> > --- > Changes since v1: > - Dropped unneeded gpr node. > - Change the property name to fsl,sai-mclk-direction-output. (Nicolin) > - Do a runtime check against fsl,imx6ul-sai. (Nicolin) > - Use macro instead of switch statement. (Nicolin) > > .../devicetree/bindings/sound/fsl-sai.txt | 5 +++++ > include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 6 ++++++ > sound/soc/fsl/fsl_sai.c | 22 ++++++++++++++++++++++ > 3 files changed, 33 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt > index 044e5d7..bec3ae0 100644 > --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt > +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt > @@ -48,6 +48,11 @@ Required properties: > receive data by following their own bit clocks and > frame sync clocks separately. > > +Optional properties (for mx6ul): > + > + - fsl,sai-mclk-direction-output: This is a boolean property. If present, > + indicates that SAI will output the SAI MCLK clock. > + > Note: > - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the > default synchronous mode (sync Rx with Tx) will be used, which means both > diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h > index 238c8db..6835382 100644 > --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h > +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h > @@ -447,5 +447,11 @@ > #define IMX6UL_GPR1_ENET2_CLK_OUTPUT (0x1 << 18) > #define IMX6UL_GPR1_ENET_CLK_DIR (0x3 << 17) > #define IMX6UL_GPR1_ENET_CLK_OUTPUT (0x3 << 17) > +#define IMX6UL_GPR1_SAI1_MCLK_DIR (0x1 << 19) > +#define IMX6UL_GPR1_SAI2_MCLK_DIR (0x1 << 20) > +#define IMX6UL_GPR1_SAI3_MCLK_DIR (0x1 << 21) > +#define IMX6UL_GPR1_SAI_MCLK_MASK (0x7 << 19) > +#define MCLK_DIR(x) (x == 1 ? IMX6UL_GPR1_SAI1_MCLK_DIR : x == 2 ? \ > + IMX6UL_GPR1_SAI2_MCLK_DIR : IMX6UL_GPR1_SAI3_MCLK_DIR) > > #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ > diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c > index d8b673f..506a5f8 100644 > --- a/sound/soc/fsl/fsl_sai.c > +++ b/sound/soc/fsl/fsl_sai.c > @@ -21,6 +21,8 @@ > #include <sound/core.h> > #include <sound/dmaengine_pcm.h> > #include <sound/pcm_params.h> > +#include <linux/mfd/syscon.h> > +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> > > #include "fsl_sai.h" > #include "imx-pcm.h" > @@ -786,10 +788,12 @@ static int fsl_sai_probe(struct platform_device *pdev) > { > struct device_node *np = pdev->dev.of_node; > struct fsl_sai *sai; > + struct regmap *gpr; > struct resource *res; > void __iomem *base; > char tmp[8]; > int irq, ret, i; > + u32 index; > > sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL); > if (!sai) > @@ -878,6 +882,24 @@ static int fsl_sai_probe(struct platform_device *pdev) > fsl_sai_dai.symmetric_samplebits = 0; > } > > + if (of_find_property(np, "fsl,sai-mclk-direction-output", NULL) && > + of_device_is_compatible(pdev->dev.of_node, "fsl,imx6ul-sai")) { > + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr"); > + if (IS_ERR(gpr)) { > + dev_err(&pdev->dev, "cannot find iomuxc registers\n"); > + return PTR_ERR(gpr); > + } > + > + ret = of_property_read_u32(np, "sai-index", &index); Do we need to add this to binding doc as well? Or will it be better to use alias here? I am not sure though. Thanks Nicolin > + if (ret) { > + dev_err(&pdev->dev, "could not read sai-index\n"); > + return ret; > + } > + > + regmap_update_bits(gpr, IOMUXC_GPR1, MCLK_DIR(index), > + MCLK_DIR(index)); > + } > + > sai->dma_params_rx.addr = res->start + FSL_SAI_RDR; > sai->dma_params_tx.addr = res->start + FSL_SAI_TDR; > sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX; > -- > 1.9.1 > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel