The expected MCLK frequency ranges and the associated dividers
are updated to improve PLL locking in a corner scenario, with low
MCLK frequency near an input divider change boundary.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
---
This patch is based on v4.6-rc1 kernel version
sound/soc/codecs/da7218.c | 32 ++++++++++++++++----------------
sound/soc/codecs/da7218.h | 21 ++++++++++++---------
2 files changed, 28 insertions(+), 25 deletions(-)
diff --git a/sound/soc/codecs/da7218.c b/sound/soc/codecs/da7218.c
index 93575f2..99ce23e 100644
--- a/sound/soc/codecs/da7218.c
+++ b/sound/soc/codecs/da7218.c
@@ -1868,27 +1868,27 @@ static int da7218_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
/* Verify 32KHz, 2MHz - 54MHz MCLK provided, and set input divider */
if (da7218->mclk_rate == 32768) {
- indiv_bits = DA7218_PLL_INDIV_2_5_MHZ;
- indiv = DA7218_PLL_INDIV_2_10_MHZ_VAL;
+ indiv_bits = DA7218_PLL_INDIV_9_TO_18_MHZ;
+ indiv = DA7218_PLL_INDIV_9_TO_18_MHZ_VAL;
} else if (da7218->mclk_rate < 2000000) {
dev_err(codec->dev, "PLL input clock %d below valid range\n",
da7218->mclk_rate);
return -EINVAL;
- } else if (da7218->mclk_rate <= 5000000) {
- indiv_bits = DA7218_PLL_INDIV_2_5_MHZ;
- indiv = DA7218_PLL_INDIV_2_10_MHZ_VAL;
- } else if (da7218->mclk_rate <= 10000000) {
- indiv_bits = DA7218_PLL_INDIV_5_10_MHZ;
- indiv = DA7218_PLL_INDIV_2_10_MHZ_VAL;
- } else if (da7218->mclk_rate <= 20000000) {
- indiv_bits = DA7218_PLL_INDIV_10_20_MHZ;
- indiv = DA7218_PLL_INDIV_10_20_MHZ_VAL;
- } else if (da7218->mclk_rate <= 40000000) {
- indiv_bits = DA7218_PLL_INDIV_20_40_MHZ;
- indiv = DA7218_PLL_INDIV_20_40_MHZ_VAL;
+ } else if (da7218->mclk_rate <= 4500000) {
+ indiv_bits = DA7218_PLL_INDIV_2_TO_4_5_MHZ;
+ indiv = DA7218_PLL_INDIV_2_TO_4_5_MHZ_VAL;
+ } else if (da7218->mclk_rate <= 9000000) {
+ indiv_bits = DA7218_PLL_INDIV_4_5_TO_9_MHZ;
+ indiv = DA7218_PLL_INDIV_4_5_TO_9_MHZ_VAL;
+ } else if (da7218->mclk_rate <= 18000000) {
+ indiv_bits = DA7218_PLL_INDIV_9_TO_18_MHZ;
+ indiv = DA7218_PLL_INDIV_9_TO_18_MHZ_VAL;
+ } else if (da7218->mclk_rate <= 36000000) {
+ indiv_bits = DA7218_PLL_INDIV_18_TO_36_MHZ;
+ indiv = DA7218_PLL_INDIV_18_TO_36_MHZ_VAL;
} else if (da7218->mclk_rate <= 54000000) {
- indiv_bits = DA7218_PLL_INDIV_40_54_MHZ;
- indiv = DA7218_PLL_INDIV_40_54_MHZ_VAL;
+ indiv_bits = DA7218_PLL_INDIV_36_TO_54_MHZ;
+ indiv = DA7218_PLL_INDIV_36_TO_54_MHZ_VAL;
} else {
dev_err(codec->dev, "PLL input clock %d above valid range\n",
da7218->mclk_rate);
diff --git a/sound/soc/codecs/da7218.h b/sound/soc/codecs/da7218.h
index c2c5904..477cd37 100644
--- a/sound/soc/codecs/da7218.h
+++ b/sound/soc/codecs/da7218.h
@@ -876,15 +876,11 @@
/* DA7218_PLL_CTRL = 0x91 */
#define DA7218_PLL_INDIV_SHIFT 0
#define DA7218_PLL_INDIV_MASK (0x7 << 0)
-#define DA7218_PLL_INDIV_2_5_MHZ (0x0 << 0)
-#define DA7218_PLL_INDIV_5_10_MHZ (0x1 << 0)
-#define DA7218_PLL_INDIV_10_20_MHZ (0x2 << 0)
-#define DA7218_PLL_INDIV_20_40_MHZ (0x3 << 0)
-#define DA7218_PLL_INDIV_40_54_MHZ (0x4 << 0)
-#define DA7218_PLL_INDIV_2_10_MHZ_VAL 2
-#define DA7218_PLL_INDIV_10_20_MHZ_VAL 4
-#define DA7218_PLL_INDIV_20_40_MHZ_VAL 8
-#define DA7218_PLL_INDIV_40_54_MHZ_VAL 16
+#define DA7218_PLL_INDIV_2_TO_4_5_MHZ (0x0 << 0)
+#define DA7218_PLL_INDIV_4_5_TO_9_MHZ (0x1 << 0)
+#define DA7218_PLL_INDIV_9_TO_18_MHZ (0x2 << 0)
+#define DA7218_PLL_INDIV_18_TO_36_MHZ (0x3 << 0)
+#define DA7218_PLL_INDIV_36_TO_54_MHZ (0x4 << 0)
#define DA7218_PLL_MCLK_SQR_EN_SHIFT 4
#define DA7218_PLL_MCLK_SQR_EN_MASK (0x1 << 4)
#define DA7218_PLL_MODE_SHIFT 6
@@ -1336,6 +1332,13 @@
#define DA7218_PLL_FREQ_OUT_90316 90316800
#define DA7218_PLL_FREQ_OUT_98304 98304000
+/* PLL Frequency Dividers */
+#define DA7218_PLL_INDIV_2_TO_4_5_MHZ_VAL 1
+#define DA7218_PLL_INDIV_4_5_TO_9_MHZ_VAL 2
+#define DA7218_PLL_INDIV_9_TO_18_MHZ_VAL 4
+#define DA7218_PLL_INDIV_18_TO_36_MHZ_VAL 8
+#define DA7218_PLL_INDIV_36_TO_54_MHZ_VAL 16
+
/* ALC Calibration */
#define DA7218_ALC_CALIB_DELAY_MIN 2500
#define DA7218_ALC_CALIB_DELAY_MAX 5000
--
1.9.3
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
