Although one weird behavior about the input path (inconsistent D0/D3 switch) on Cirrus CS420x codecs was fixed in the previous commit, there is still an issue on some Mac machines: the capture stream stalls when switching the ADCs on the fly. More badly, this keeps stuck until the next reboot. The dynamic ADC switching is already a bit fragile and assuming optimistically that the chip accepts the frequent power changes. On Cirrus codecs, this doesn't seem applicable. As a quick workaround, we pin down the ADCs to keep up in D0 when spec->dyn_adc_switch is set. In this way, the ADCs are kept up only for the system that were confirmed to be broken. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171 Cc: <stable@xxxxxxxxxxxxxxx> # v4.4+ Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> --- sound/pci/hda/patch_cirrus.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index a47e8ae0eb30..80bbadc83721 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -361,6 +361,7 @@ static int cs_parse_auto_config(struct hda_codec *codec) { struct cs_spec *spec = codec->spec; int err; + int i; err = snd_hda_parse_pin_defcfg(codec, &spec->gen.autocfg, NULL, 0); if (err < 0) @@ -370,6 +371,19 @@ static int cs_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; + /* keep the ADCs powered up when it's dynamically switchable */ + if (spec->gen.dyn_adc_switch) { + unsigned int done = 0; + for (i = 0; i < spec->gen.input_mux.num_items; i++) { + int idx = spec->gen.dyn_adc_idx[i]; + if (done & (1 << idx)) + continue; + snd_hda_gen_fix_pin_power(codec, + spec->gen.adc_nids[idx]); + done |= 1 << idx; + } + } + return 0; } -- 2.8.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
