> On Apr 19, 2016, at 01:37 , Peter Ujfalusi <peter.ujfalusi@xxxxxx> wrote: > > On 04/19/16 11:05, Rick Mann wrote: >>>> Yup, seems like it's 0: >>>> >>>> [ 67.876673] davinci-mcasp 48038000.mcasp: Slots: 2, >>>> max_active_serializers: 1, active_serializers: 0, channels: 2, >>>> mcasp->num_serializer: 0 [ 67.889362] davinci-mcasp 48038000.mcasp: ASoC: >>>> can't set 48038000.mcasp hw params: -22 >>> >>> How can it be? >>> can you take a look of the davinci_mcasp_set_pdata_from_of() function where >>> the serial-dir is set up? Do we get the of_serial_dir32? What is the size of >>> the array we got (val)? >> >> It seems to be 0: >> >> [ 8.411990] davinci-mcasp 48038000.mcasp: davinci_mcasp_probe: enter >> [ 8.453167] davinci-mcasp 48038000.mcasp: serial-dir: 0 >> [ 8.501317] davinci-mcasp 48038000.mcasp: invalid tdm slots: 0 >> [ 8.554405] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: enter >> [ 8.562924] davinci-mcasp 4803c000.mcasp: serial-dir: 0 >> [ 8.635250] davinci-mcasp 4803c000.mcasp: invalid tdm slots: 0 > > Hrm, it seems that we can not read any of the parameters set by the DT > fragment for mcasp0, my guess is that the tx-num-evt and rx-num-evt is not > there either. > > from the full log: the mcasp is loaded earlier than you have patched the DT > with the audio overlay. > > [ 8.220175] davinci-mcasp 48038000.mcasp: davinci_mcasp_probe: enter > [ 8.268496] davinci-mcasp 48038000.mcasp: invalid tdm slots: 0 > [ 8.323405] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: enter > [ 8.339936] davinci-mcasp 4803c000.mcasp: invalid tdm slots: 0 > ... > [ 33.432680] bone_capemgr bone_capemgr: part_number 'BB-BONE-AUDI-02', > version 'N/A' > [ 33.432719] bone_capemgr bone_capemgr: slot #4: override > [ 33.432736] bone_capemgr bone_capemgr: Using override eeprom data at slot 4 > [ 33.432752] bone_capemgr bone_capemgr: slot #4: 'Override Board > Name,00A0,Override Manuf,BB-BONE-AUDI-02' > [ 33.451729] bone_capemgr bone_capemgr: slot #4: dtbo > 'BB-BONE-AUDI-02-00A0.dtbo' loaded; overlay id #0 > [ 33.462646] 2-0018 supply IOVDD not found, using dummy regulator > [ 33.462722] 2-0018 supply DVDD not found, using dummy regulator > [ 33.462779] 2-0018 supply AVDD not found, using dummy regulator > [ 33.462822] 2-0018 supply DRVDD not found, using dummy regulator > [ 33.484174] asoc-simple-card sound: tlv320aic3x-hifi <-> 48038000.mcasp > mapping ok > [ 50.062097] davinci-mcasp 48038000.mcasp: Slots: 2, max_active_serializers: > 1, active_serializers: 0, channels: 2 > [ 50.072596] davinci-mcasp 48038000.mcasp: stream has more channels (2) than > are enabled in mcasp (0) > [ 50.072613] davinci-mcasp 48038000.mcasp: ASoC: can't set 48038000.mcasp hw > params: -22 > > You can try to remove the mcasp module, do the DT fragment magic, reload the > mcasp driver if it is not loaded automatically. I don't quite understand how to do what you're suggesting here. > But if you want to get it working properly you need to find the dts(i) file > which set the mcasp0 and mcasp1 nodes to status = "okay"; > In upstream we do not do this, so it must come from the bone changes. The DTB (prior to the BB-BONE-AUDI-02 overlay) starts with this file: http://pastebin.com/5vVEdAKt That file first includes the following files in this order, before adding its own entries (sorry about the line length): https://github.com/RobertCNelson/dtb-rebuilder/blob/4.4.x/src/arm/am33xx.dtsi https://github.com/RobertCNelson/dtb-rebuilder/blob/4.4.x/src/arm/am33xx-es2.dtsi https://github.com/RobertCNelson/dtb-rebuilder/blob/4.4.x/src/arm/am335x-bone-common.dtsi https://github.com/RobertCNelson/dtb-rebuilder/blob/4.4.x/src/arm/am33xx-overlay-edma-fix.dtsi The last of these files sets spi0, spi1, mcasp0, mcasp1 to "okay". If I understand what you're saying, this is causing the driver to load before other things have been set in the DT, and they should be moved to later, perhaps in the overlay? In fact, the overlay (which gets loaded after login) does also set the mcasp0 to "okay" (I think): https://github.com/RobertCNelson/bb.org-overlays/blob/master/src/arm/BB-BONE-AUDI-02-00A0.dts#L72 I rebuilt the .dtb by commenting out the enabling of the macasp0/1 in that .dtsi, and now it seems to work! davinci_mcasp_probe is entered when I apply the overlay, and I get this logged: [ 35.868324] davinci-mcasp 48038000.mcasp: davinci_mcasp_probe: enter [ 35.874741] davinci-mcasp 48038000.mcasp: serial-dir: 64 [ 43.469254] davinci-mcasp 48038000.mcasp: Slots: 2, max_active_serializers: 1, active_serializers: 1, channels: 2, mcasp->num_serializer: 16 [ 78.846314] davinci-mcasp 48038000.mcasp: Slots: 2, max_active_serializers: 1, active_serializers: 1, channels: 2, mcasp->num_serializer: 16 By default, speaker-test only outputs to the left channel, and I get noise out that channel. If I invoke speaker-test -c 2, it claims to cycle between Front Left and Front Right, but there is only silence out the Front Right. This is probably due to issues in asound.state, right (I'd sure love some help getting that straightened out)? In any case, thank you. This seems to have advanced things considerably. I really appreciate your help and your patience. -- Rick Mann rmann@xxxxxxxxxxxxxxx _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
